Kitchen Fitting jobs in Maidenhead, Berkshire

Job Description

Removal of current utility room to create new open plan kitchen. Move downstairs loo to opposite side of house to create new room, create internal double doors between kitchen & Playroom (single door exists) and create double patio doors to garden (one window & back door exist). Supply and Fit kitchen, make good all areas of renovation including ceilings.

Job Description

Remove old kitchen units and dispose of
Fit 12 units, flat pack on two sides of kitchen
Fit worktop 2 x 3m lengths
Fit sink & taps
Tile walls
Paint walls
Re-install existing dishwasher, washing machine, fridge, gas cooker, extractor hood
Lay laminate flooring in kitchen & hall approx 10 sq m total
Lay electric underfloor heating in kitchen and hall

Kitchen units, sink, taps, flooring, tiles, underfloor heating will be provided.

Job Description

Assembly of kitchen plus joinery on solid wood counter

Job Description

Experienced kitchen fitter/carpenter required for 2 days work, preferably on the 19th/20th of March.

- I will be stripping out the existing units so the room should be bare (or 90% at least)
- The units will all be arriving pre-built so it's just a case of positioning and securing them to one another and the walls. There are cabinets down two sides of a galley kitchen, so approx 10-12 cabinets of varying sizes plus several wall cabinets.
- Wooden worktops need cutting down to size, plus securing and cut outs for sink and hob made. 1 2.3m straight run and a 2.7m L shaped run.
- Wooden upstands need cutting to length, plus mitreing
- Plinths and end panels all need to be cut to length and installed (4 end panels + 5 metres of plinth)
- Hanging the two wall cabinets
- Mounting the chimney extractor hood
- Installing door furniture (doors are pre-hung so just handles)
- Making good where required

(The plumber will be sorting the gas and water connections so no need to worry about those).

Please let me know availability and experience. Preference will obviously be given to those trades who are fairly local.

Job Description

Install cold water outlet for washing machine & dish washer. Replace carpet with ceramic wall tiles of an area approximately 10m2

Job Description

To install a kitchen in the current utility room. All goods to be supplied (as confirmed). Waste to remain on site.
Works to include:
- Removal of current 3 base units, two wall units, worktop, butler sink and tiles.
- Remove radiator, fit central heating plinth heater.
- Fit units (4 base units, 2 wall units), pelmets, plinth, worktops 1x1.6m, 1x2m.
- Fit sink with plumbing for washing machine.
- Fit chimney hood and freestanding electric cooker (cooker circuit required)
- Install one double plug socket above worktop, in addition to cooker + 1 socket). - Tile walls (c. 1.6m2)

Room size c. 2.85m x 2.20m.
Pictures of room as-is and of draft layout attached.

Job Description

Wickes design and units.

Removal of:

- Existing units + sink
- Working free standing oven

Installation of:

3x Wall Units
2x Corner Base 1000mm Units (straight, not L)
1x 500mm Base Drawer Unit
1x 500mm Base Unit
3x Doors Fitted to existing full height cupboard (but taken from 500mm units)
2x Wine Rack

Building work:

- Cutting and re plastering of a box (need to lower the height in order to put work surface over the top, gas meter currently inside this box, no obstructions)
- Tiling of floor (ceramic) approx. 8m2
- Worktop approx. 3x3m
- Sink and hob placement in worktop

Electric work:

- Fitting of oven, oven hood, fridge, freezer and tumble dryer

Gas work:

- Fitting of gas hob

Plumbing work:

- Fitting of sink, taps and washing machine

-------

Viewing can be done on weekends or weekdays after 7pm. Do not hesitate to contact with any questions.

* Added 2nd September, 2012 :
-------- EDIT -----------

I have now removed existing cabinets and oven will be removed. There will need to be some plastering done (the original cabinets were nailed into the wall).

Appliances have been bought (delivery on 15th) but need to be fitted.

SOME electrical work required - for oven, fridge and freezer (due to there only being one socket) and tumble dryer (no existing socket on right hand side of kitchen).

Ideally I would like to use Benchmarx (from Travis Perkins) units which are the same as Wickes but already assembled so a trade account would be a bonus.

Job Description

Have bought a 2nd hand kitchen and need it to be fitted, have cleared existing kitchen so there is only the sink left. Need some ideas of where to put things and how things will all fit in and then someone to install it

Job Description

Kitchen needs to be fitted- all units have been fitted by a builder (minus some of the doors)- but the units need re-jigging as some dont mate up properly. Also oak counter top needs to be installed properly. The builder i was using was unreliable and workmanship was not good. Please call me to arange a quote. Thanks James

Job Description

Installed a new kitchen 3 years ago with granite worktops. Granite fitter decided to add silicone glue and not attach the easy installation G clips from Frankie. Now the sink is slowly giving way. Ordered a tube of Rotabond 2000 adhesive and G clips as advised by the manufactures. Instructions are downloaded.

Job Description

Replacing existing kitchen by installing a new kitchen.

Job Description

New kitchen being installed and need an acrylic worktop to be cut (2 mitre joints required, cutout for electric hob, sink and tap) and fitted in. This needs to be done this Saturday (14 April)

Job Description

Kitchen dated, would like to:
- replace worktops and sink
- refurbish existing cabinets

Job Description

5 base units and 4 wall units added on to my current kitchen.

Dishwasher plumbed in

Wiring for new double oven, built in microwave and induction hob (currently have gas) and fridge freezer

New worktop fitted

Floor and wall tilling

Light switch moved

* Added 6th September, 2011 :
I have the units, worktops etc already so this is for labour only.

Job Description

The existing integrated elica cooking hood does not work properly and need a replacement. Can you please quote the costs of decommission and installation for labour only (i.e. I will buy the replacement elica) and for also including the material i.e. new replacement of integrated elica cooking hood.