Garages & Sheds jobs in Tonbridge, Kent

Job Description

running down the side of the house i want a wooden shed /workshop 6ft wide 18/ 20 ft long built in a lean to design

Job Description

Repair of old Greenhouse to include replacing missing panes and removal of an old lean-to awning that is next to the greenhouse.

Job Description

I want to replace shiplap wood on an 18' x 18' garage with ideally gloss white uPVC shiplap. I am looking for a quote to remove existing shiplap, supply and fit the shiplap. Also a quote for supply of UPVC shiplap only as I can do the work myself. The garage is only 10 years old and has a decent wooden frame on a concrete base, it might need a new waterproof membrane e.g Tyvek... as the existing membrane seems to be bitumen coated paper and has torn in places.

Job Description

There is a small leaky patch on my flat garage roof. Rain water trickles down both outside and inside of leak. Woodwork inside garage rood is damp.

Job Description

Fit Garage Door Opener Motorlift premium belt drive + plaster ceiling and some rendering for 1.5m addition to garage already completed (see photos)

Job Description

Existing asbestos roof has been damaged by heavy snow. I have arranged seperate quote to remove asbestos corigated sheets. Single garage 15m x 2.6m will need new roof and possibly 2 x courses of brickwork to raise roof slightly for new support beam to be installed plus existing plastic guttering to be refitted. This quote is for Home insurance claim.

Job Description

Hello.
I live in Sevenoaks and have a detached garage.
Two jobs:
1) The garage has large wooden doors which need some attention. They are rotten at the bottom and I would like to know if they can be repaired or should be replaced.
2) There is also a damp patch on the floor of the garage and I would like to know how this can be addressed.
Thanks.

Job Description

single brick built garage, needs 2 new wooden framed windows, new garage doors, complete new pitched roof (current construction may contain asbestos), new level floor. Possibly requires repointing. Second quote required for knocking it down and rebuilding similar, possibly moving it up the drive.

Job Description

1 Remove exisitng corrugated roof, replace with ply/felt/chippings (5.6m x 7.25m).

2. Remove existing timber door (2.1 x 0.85) and 3no windows (1.23 x 0.93), including frames, and replace with UPVC units.

3. Remove timber weather board to front, and replace with UPVC board (5m x 0.67).

4. Remove timber board and gutter/downpipe to rear, and replace with UPVC board (5.6m) and new gutter (5.6m) and downpipe (2.5m).

5. Remove 2no timber uprights at side of up-and-over door, and replace with new (treated) timber (2no x 2m x 95mm x 75mm).

6. Take up old concrete apron at front of garage and side gate, and replace with new concrete (8.3m x 0.8m).

7. Remove timber facia and soffit (2.5m wide), and gutter (2.5m)/downpipe (2.7m) at rear of house, and replace with UPVC boards and gutter/downpipe.

8. Re-point chimney stack on main house (no sizes obtained).

9. Cart all all removed materials to tip.

Notes: all replacement UPVC items to be white.
Please price each item separately, as I may have to pick some and leave others, depending on total price.