Electrical jobs in Huddersfield, West Yorkshire

Job Description

To fit a bosch standard chimney extracter fan up to plaster board and to connect to power supply and to put 4 new double plug sockets in 1 for my washer and dish washer 1for my extracter fan and the other 2 for my microwave kettle etc I just need a rough quote please I have the extracter but you supply the sockets thank you

* Added 2nd June, 2013 :
Ps the chimney extracter dosnt need putting out side as it will be working of a the fillter thank you

Job Description

disconnect electricity and remove plug sockets and wiring to one wall of kitchen so that the wall can be knocked through into the adjoining room.

Job Description

I have just purchased 9 Bathroom Downlights (Fire Rated/IP65 etc) that I need wiring into my bathroom and Ensuite. Currently there is a main/centre light in the room/s so the feed/s from these can be used for the downlights....but I will need the wire supplying from the junction box to the downlights etc..

Job Description

The landing light switch at the bottom of the stairs is loose/broken and the light with this switch (on the ceiling at the top of the stairs) has fused and is black. As this is the case we have made the decision not to touch it. We would appreciate someone who can take a look at it and fix as needed. We have also found issues with the recess lights in the bathroom and wonder if it is connected to this aswell. Many thanks

Job Description

3 security lights fitting on the outside of the house

Job Description

1.We currently have LV spotlights in the kitchen which have stopped working - we need them replaced with LED spotlights.
2. We also have a plug socket in an accompanying outbulding which needs repair and we would like another socket added aswell (the outbuliding has its own fuse box).
3. We have outside lights that are not working and we would like one of these moved and both repaired.

Job Description

Hi, we have returned from holiday to find that we have no bathroom lights. The problem does not appear to be the pull switch or fuse in the isolation switch. All other lights upstairs are working. I suspect that the transformer for the downlighters has failed. The transformer is in the loft. Whilst this job is being done need to replace the ceiling extractor fan in the bathroom which ceased working some time ago.

Job Description

The low voltage lighting in the kitchen not working correctly, only 3 out of 6 bulbs work. Looks like some of the wiring is possibly burnt or loose (possibly replace with 240V?). Plus security lights at front and side of house needs reinstaing. Additionally, an electrically connected smoke sensor not working at all.

Job Description

Back to back terrace, late 1800's.
I would like to have all electrics checked. If it is ok, I am wanting new sockets put in and a water boiler needs wiring altered(socket been wired into bathroom which I beleive is not allowed).Also some wiring removed.

Job Description

I have a new shed that requires powering. It requires armoured electrical cable laying under the concrete. As it's decorative concrete, I'm looking for someone with experience in doing this for a neat finish. The cable needs to be completely hidden and wired correctly to the nearest outlet which is in the kitchen. The distance is approximately 2 metres.

Job Description

Following redecoration of the kitchen we want to replace the rise and fall light fitting with a new one (already purchased).

We also would like a shaver point fitting in the shower.

* Added 12th January, 2013 :
*******The above should have read 'SHOWER ROOM'. Apologies for any confusion.

Job Description

There are 2 rooms and an ensuite that need wiring, new sockets and spotlights and also smoke alarms wired in to the mains. There is electrics already in the cellar.

Job Description

We need a full re-wire with basic white plastic finish. We have 4 bedrooms, kitchen, 3 living areas, 1 bathroom, cellar. New consumer unit required. Need circa 30 double sockets.

House is 1920's with access to the ground floor via the cellar.

Please quote for labour and materials.

Job Description

Wanting to disconnect old electric cooker and reconnect new one. Reasonable quoted will be considered.
No time wasters.

Job Description

I need a new fuse board and junction box installing. The cables from the wall are very short and need pulling through.
The old fuse box had 4 fuses, there was the upstairs sockets, Downstairs sockets and the shower running from 1 15amp fuse. The fuse burnt and the cables burnt back.
Please see attached picture.