Electrical jobs in Maida Hill, West London

Job Description

Hi,

We are looking for someone who can connect our new cooker. The cooker is a Leisure GRB6CVK-BK 60cm freestanding cooker and requires a HO5W-FG5 x 1, 5mm2 / 3 x 4mm2 cable which was not supplied. We also require a ceiling light fitted which does not attach to the original light fitting. We are happy to call to discuss.

Availability before 10.30am or after 6pm preferred.

Thanks, Kerry

Job Description

I currently have one of the 2D 4pin lamp fittings type B in my bathroom where when the light switch cord is set to the on position it make the lamp turn on and the extraction fan at the same time.

I have changed bulbs before without any problems once they have had their lives worth but This time I have changed the bulb and the light still does not turn on fully. I thought maybe it was a faulty bulb so purchased another and still it has made no change. The light only partly comes on at the start of the two tubes of the 2D lamp but does not come on fully as it should. The extraction fan still comes on as it should.

The job I would like to request is take the exact same light fitting from the balcony and replace the bathroom fitting with this, or to repair the current fitting if it is possible.

Job Description

Supply and install new electrical distribution board with RCD protection. Issue electrical installation certificate.

Install 2 gang mk dimmer or a trailing edge dimmer

EICR report

PAT and gas safety certificates

Job Description

I am moving my electricity meter from inside front room to front outside wall. I have a quote and details from electricity board on this, but need an electrician to do the most of the work. At the same time I would like the fuse box to be moved.

Job Description

I am looking for quotes on the potential wiring and installation of approximately 9 recessed ceiling lights in a kitchen ceiling of a two bed house victorian house in walthamstow. I would also like to install a pendant lamp in the same room above a breakfast bar. Ideally both pendant and recessed lights would be on separate dimmers.

The job would involve taking down the existing lights which are suspended on wires across the length of the ceiling before installing new lighting.

I am interested in whether the tradesman would have to carry out the work by going in through the floor above (to avoid joists etc) or be able to execute the wiring and installation from the kitchen. Minimal disruption to the home would be preferable, but equally id like to avoid a ceiling that ends up looking like a pepper pot. Ideally quotes would include the estimated cost of fixtures and installation.

many thanks.

Job Description

We are looking for two things to be done, namely -
- change a light fitting in the hall
- input a light fitting (spot light) and with in the cloak room - no fixtures for lighting in their at the moment.

Job Description

Removal of a small, old Dimplex bathroom wall heater to be replaced with the installation of a Knightsbridge Mirror Light c/w dual voltage shaver socket (Model RCTM2T8). Existing wire to old heater may need lengthening as possibly located in the wrong place for the mirror light.

Job Description

the fire alarm keeps beeping continuously, preventing us from sleeping, this needs to be fixed ASAP.

Job Description

Large Studio in a Converted Church (pre-1900) has lots of lights that need replacing. They are about 15 feet high, above a wooden, sprung floor. They include several flood lights that I believe need new ballasts and possibly bulbs and a selection of other lights. Materials would all need to be bought as well.

Job Description

As title! Electrical installation only as wires already hanging out of ceiling.

Job Description

To install two lights one in the kitchen and one in the lounge.

Job Description

I'am after an electrician who could do a full-rewiring of a 3 stirey Victorian house.
I would expect to receive a quote range + costs breakdown + duration + Guarantee period/Certification.
-> Viewing can be organized

Job Description

Double socket in relatively recently rewired house has failed. Was running both a washing machine and umble dryer. All fuses ok and machines working on other sockets. Possibly a slave socket that has been overloaded but new baby means I don't have the time or headspace to do it myself!

Job Description

Hello please can you provide a quote for the above ie Disconection of old & installation of new oven cooker? Disconnection & installation may need to happen on different days pending delivery of oven. Please email replies only.

* Added 28th April, 2013 :
My oven cooker is dual fuel so I need an electrician to disconnect the oven part and a gas engineer to disconnect the gas part before delivery of the replacement so that they can take it away. Once the new cooker is delivered I will need re-connection of the electrics and the gas supply. Can you provide this service at a reasonable charge please?

Job Description

three bed terraced house with ancient fuse box, sockets in skirting boards old wall switches etc. In process of buying the house