Electrical jobs in Kentish Town, North London

Job Description

I need someone to help convert wall lights in the living room and 2 bedrooms into "downlights" (spotlights).

The floorplan of the flat can be found here (http://www.dundeewharf.com/plans/index.shtml?typeb.inc)

Job Description

Fit 2 LED light bulbs sockets in the bathroom (for GU10 light bulbs)
(See picture attached, we'd like to have this replaced with a standard GU10 socket)

Job Description

We were going to install a new power shower, and realised that fusebox was too old and it would be great to replace it before installing it. It is for a studio flat. Job would be new fusebox and the cabling for the shower.

Job Description

My bathroom light will not turn on. It would appear it is simply a loose connection or the switch is broken.
A quote for time would be appreciated.

Job Description

Hi,

We are looking for someone who can connect our new cooker. The cooker is a Leisure GRB6CVK-BK 60cm freestanding cooker and requires a HO5W-FG5 x 1, 5mm2 / 3 x 4mm2 cable which was not supplied. We also require a ceiling light fitted which does not attach to the original light fitting. We are happy to call to discuss.

Availability before 10.30am or after 6pm preferred.

Thanks, Kerry

Job Description

I currently have one of the 2D 4pin lamp fittings type B in my bathroom where when the light switch cord is set to the on position it make the lamp turn on and the extraction fan at the same time.

I have changed bulbs before without any problems once they have had their lives worth but This time I have changed the bulb and the light still does not turn on fully. I thought maybe it was a faulty bulb so purchased another and still it has made no change. The light only partly comes on at the start of the two tubes of the 2D lamp but does not come on fully as it should. The extraction fan still comes on as it should.

The job I would like to request is take the exact same light fitting from the balcony and replace the bathroom fitting with this, or to repair the current fitting if it is possible.

Job Description

Supply and install new electrical distribution board with RCD protection. Issue electrical installation certificate.

Install 2 gang mk dimmer or a trailing edge dimmer

EICR report

PAT and gas safety certificates

Job Description

I am moving my electricity meter from inside front room to front outside wall. I have a quote and details from electricity board on this, but need an electrician to do the most of the work. At the same time I would like the fuse box to be moved.

Job Description

We had carpets fitted today and now our upstairs lighting is not working and the trip switch keeps sparking and going off when I try and turn it back on.

As an aside we also have another less urgent job where we do not get any power to our cooker hood which would also be good if someone could look at that.

Obviously we'd like the lighting fixed as soon as possible.

Thank you

Ben

Job Description

I am looking for quotes on the potential wiring and installation of approximately 9 recessed ceiling lights in a kitchen ceiling of a two bed house victorian house in walthamstow. I would also like to install a pendant lamp in the same room above a breakfast bar. Ideally both pendant and recessed lights would be on separate dimmers.

The job would involve taking down the existing lights which are suspended on wires across the length of the ceiling before installing new lighting.

I am interested in whether the tradesman would have to carry out the work by going in through the floor above (to avoid joists etc) or be able to execute the wiring and installation from the kitchen. Minimal disruption to the home would be preferable, but equally id like to avoid a ceiling that ends up looking like a pepper pot. Ideally quotes would include the estimated cost of fixtures and installation.

many thanks.

Job Description

2 bed,needs a rewire
New 10 way c/u
14 double sockets(sunk into walls) 5 lounge,3 in 2 beds,1 hall,2 in dining room.
6 f/r downlights in hall
6 ceiling roses+switches
3 bathroom f/r downlights+ a shower/light extactor fan
1 wall extractor fan(bathroom)
1 exterior double socket
Garage socket and light(detatched garage)
outside light(carriage light)
Tails to be left for future extension

Property is 1930`s with wooden floors
Thanks

Job Description

We are looking for two things to be done, namely -
- change a light fitting in the hall
- input a light fitting (spot light) and with in the cloak room - no fixtures for lighting in their at the moment.

Job Description

Removal of a small, old Dimplex bathroom wall heater to be replaced with the installation of a Knightsbridge Mirror Light c/w dual voltage shaver socket (Model RCTM2T8). Existing wire to old heater may need lengthening as possibly located in the wrong place for the mirror light.

Job Description

the fire alarm keeps beeping continuously, preventing us from sleeping, this needs to be fixed ASAP.

Job Description

Large Studio in a Converted Church (pre-1900) has lots of lights that need replacing. They are about 15 feet high, above a wooden, sprung floor. They include several flood lights that I believe need new ballasts and possibly bulbs and a selection of other lights. Materials would all need to be bought as well.