Electrical jobs in Tonbridge, Kent

Job Description

we are selling our house and need a couple of electrical problems looked at.
The dimmer light switch in our living room which has a twin controller doesn't work properly.
When turned on it turns the light in the room next door on!
The electrical devireg underfloor heating in our kitchen doesn't work so we would like that looked at

Job Description

New ceiling lights, wall lights, sockets, electric shower, exterior/security lights. First job in redecoration project so need prompt start

Job Description

I have only one socket in an upstairs bedroom which must be part of a ring circuit. I wanted to run a stud socket off of it but now realise I will also have to have a condensation control unit (maximum power 7.4w) run off of it as well. Can I run a stud socket off of the main socket, then run another line off of the main socket? (I don't think it's possible to run another stud off of a stud)... Or is it possible to split the line run off of the main socket so it feeds the secondary socket and the condensation unit? I need for somebody to identify the best solution and carry out the work.

Job Description

We have a house that we are renovating and all the wiring has been disconnected so there is only the suppliers meter and the consumer unit.
Our supplier, EDF, will not connect us to a power supply until we have a certificate that the installation (which is only a consumer unit) is safe.

I imagine this would be a very quick job for someone to test the consumer unit (which looks the modern type) and issue a certificate so we can get our power reconnected.

Would anybody like to quote for this work?

Many thanks.

Job Description

replace 3 existing wall lights with new ones

Job Description

need down lights fitted to up stairs rooms the loft is big and easy to work in its 2 days work max and i have £240.00 to spend on labour and i will provide the lights and material,

Job Description

We're currently purchasing a Victorian property that hasn't been updated in a good 40 years - as a result, it needs rewiring from top to bottom. It's a 3 bed (on 3 stories) with 2 receptions, 1 bathroom & kitchen. We're hoping to get the work done while the property is still vacant to minimise disruption (subject to permission from the current owners). We will have access to the property on 17th November, so get in touch if you are available to come and quote for the work on this date.

Job Description

We upgraded the fuse box in our house from an old wired one (1970?) to a new RCD unit. This was installed by a qualified electrician and unfortunately he is not in a position to help us further.

Since the fuse box was installed we're unable to have both the lights and power on at the same time. On the rare occasions that we can, the power will soon trip if something is plugged in. This can be anything from a hairdryer, microwave, kettle - it doesn't seem to matter. It can even trip as soon as you put both power and lights on together. We've tried different approaches, so lights in certain rooms turned off with power etc, but nothing really seems to make a difference.

We're led to believe that the former homeowner did his own DIY jobs on the electrics from time to time which could be a potential cause, but we're unable to locate the actual fault.

We've got into a system whereby we only have the power on and light supplied from power source each day- the lights are only ever on when we have a shower in the morning and the power is off (although we have a power shower which works without the power on?). Therefore there's no pressing urgency for this job to be fixed, but ideally within the next month or so.

We have a couple of other minor jobs around the house too.

Job Description

EICR for a large 4-bedroom semi. 3 ring mains, 2 lighting circuits, cooker, shower, immersion.

Job Description

House built in late 80's. Fitting LED down lights in kitchen (7) and bathroom (6) Including one in shower. Fittings already bought. Fitting of spur in kitchen for fridge freezer. Removal of cable of light switch/plug socket from old partitian wall in bedroom.

Job Description

Troubleshoot and fix the electric cable running from my fuse board to the garage.

Job Description

Just bought and fitted a Creda Eco Response 500 storage heater. I've installed it as far as mounting it to the wall, fitted bricks etc, just need a sparky to come and do the wiring. We had an old storage heater that was wired in, so the off peak wiring is all in place (assuming this is suitable, the old heater was rated at 3.4kw, new one I think is 2.5). The main bit is the peak supply cable needs wiring in. The fuse box/meter is only on the other side of the wall, so needs a short bit of wire running through (all can be surface mounted) to a box. Probably an hours work at best?

Pete

Job Description

i nead a new light switch fitted in barthroom i have the new switch just nead some won 2 fit it thanks pull cord switch

Job Description

Install new Creda TSF32K 4.8kw storage radiator in ground floor room. Fix to plasterboarded stud walling, 10mm cable direct to consumer unit for offpeak timer is already installed and also a ring circuit plug for the booster fan heater, both adjacent to where the heater is to go.
1) Please fix storage rad to stud walling
2) Please supply and install necessary Horstmann Auto 7 type timer for Economy 7 connection (there is not a separate Economy consumer unit) and connect to storage rad
3) Please supply and install appropriate fused spur or isolator or whatever for the booster fan heater and connect to storage rad
4 Please check all is okay

I live in Epsom Close, West Malling

Job Description

Kitchen light is not working, clicking noise can be heard from the fitting, on changing bulb, fuse blew, fuse box reset and now clicking noise is gone and light still not working