Electrical jobs in Orpington, Kent

Additonal wall sockets, moving one socket

  • Location: Norbury
  • Hired: PINNACLE ELECTRICAL
  • Trade: Electrical
Job Description

I have a small job, I'd like to add two double sockets to a wall and move an existing single socket up to match height of others and change it to a double.

Pictures attached.

fix a dimplex freestanding (chevalier) electric fire

  • Location: Welling
  • Hired: Goldcrest Maintenance Service
  • Trade: Electrical
Job Description

I have an 18 month old dimplex chevalier (chv20) electric fire which was working fine until we turned it on a few days ago and found it completely dead, no optiflame effect or heat or anything , I checked the fuse and the wires which are fine, It's just outside the guarantee period so dimplex won't help unless I supply them with a lot of money, again, first to buy it now to fix it. Bottom line is it's a nice fire which I would like to get working if possible, I know it's a small job but I'm hoping someone will be interested.

Extractor Fan

  • Location: Upper Norwood
  • Hired: WG electrical
  • Trade: Electrical
Job Description

Need an extractor fan fitted in the bathroom (have already selected a model just need somebody to check it's compatible) and to earth the boiler

Doorbell and light fitting repair

  • Location: Blackheath
  • Hired: Home Power Distribution Ltd
  • Trade: Electrical
Job Description

1) investigate and repair faulty doorbell

2) investigate and repair faulty ceiling lighting main bedroom

Connect cooker and one other small job

  • Location: Sydenham
  • Hired: Abrahams and Keeling
  • Trade: Electrical
Job Description

Hi,

We are looking for someone who can connect our new cooker. The cooker is a Leisure GRB6CVK-BK 60cm freestanding cooker and requires a HO5W-FG5 x 1, 5mm2 / 3 x 4mm2 cable which was not supplied. We also require a ceiling light fitted which does not attach to the original light fitting. We are happy to call to discuss.

Availability before 10.30am or after 6pm preferred.

Thanks, Kerry

fitting 6-7 spotlights from 1 light in our bedroom

  • Location: Purley
  • Hired: PINNACLE ELECTRICAL
  • Trade: Electrical
Job Description

we are looking for quotes and advice : fitting 6-7 spotlights(low voltage with transformer and 35 bulbs) in our upstairs bedroom where was a single light . the job will include wiring spotlights , cutting hole (i got circular saw ), reconnecting to double light switch(single at the moment ) . we have the down lights with transformers already + 2.5 mm cable (10m) + circular saw

Replace fuse box with new consumer unit

  • Location: Blackheath
  • Hired: AMD Electrics
  • Trade: Electrical
Job Description

Replace fuse box with new consumer unit. There are currently three circuits in the 1-bed property - a cooker circuit, sockets, and lighting. I'd like two spare RCDs for a future immersion heater and boiler power circuit.

certificate for electrics.

  • Location: Dartford
  • Hired: Elektri-Co
  • Trade: Electrical
Job Description

we have had the house re-wire about five years ago and didn't get a certificate for the work and would now like to attain this.

I would like a quote for this work. the house is four bed two bathrooms and two reception rooms.

Fit extractor fan, heated mirror and shaving socket

  • Location: Crofton Park
  • Hired: Sparky Electrical Service
  • Trade: Electrical
Job Description

- To install an extractor fan in bathroom. Note that the bathroom is on the third floor, so a tall ladder will be required to secure the external grille.

- To fit a heated mirror.

- To fit a shaving socket.

Installation of Pendant Light fitting

  • Location: Crofton Park
  • Hired: Indigo Electrical
  • Trade: Electrical
Job Description

I have a new pendant light fitting to be installed in my living room.

The shade itself is reasonably heavy and will be suspended on a fixed arm which needs to be attached to the ceiling. The job should not be too complex as electrics already in place (I do have a light there currently) but the ceiling is reasonably high (around 3metres) which means it is not completely straight-forward.

3 odd jobs

  • Location: Catford
  • Hired: Sparky Electrical Service
  • Trade: Electrical
Job Description

Hi we live in a flat in Catford and were wondering if you could help us with the following...

1) Adding a power point to a room that currently has none. It does have lighting and I think there are power cables in the walls. This power point can be put any where in the room, just where its easiest.

2) Add a power point behind a washing machine in the kitchen. Currently the machines power cable reaches out to a power point above the bench. The new power point needs to be directly below this current one.

3) In a bed room we have a string of wire lights like these (http://www.lightsworld.co.uk/p/Paulmann_Glas_100_Wire_System_Lights_in_Satin.htm?affiliate=gbase&gclid=CLf-8PqE07QCFU3HtAodWDEAcw)
They have a switch but don't seem to work. We would like them to either work or be removed depending on cost.

Also would it be possible to get this done on a weekend (depending on cost).

supply/install new consumer unit

  • Location: Chislehurst
  • Hired: KN Electrical
  • Trade: Electrical
Job Description

HI THERE - HAVE A HOUSE IN CHISLEHURST AND AM LOOKING FOR QUOTES RE VARIOUS ASPECTS OF ELECTRIC WORK - SPECIFICALLY TO SUPPLY AND INSTALL A NEW CONSUMER UNIT.
THANKS!

STUART

Electric Shower unit installation

  • Location: South Croydon
  • Hired: masterclass
  • Trade: Electrical
Job Description

Hi,

I have an existing electric shower unit which stopped working a few months back. From its previous performance ( or lack of ) I wouldnt think fixing it would be worth while therefore Im considering purchasing a new electric shower unit.

I would like to invite quotes for the installation of the unit in the bathroom. From an electrics perspective all the wiring is already in place ( as there is an existing unit albeit it is not working ).

Speak soon,
Indy.

replace fuse box

  • Location: Croydon
  • Hired: FMC Electrical
  • Trade: Electrical
Job Description

I would like my fuse box replaced. I have currently have the wired fuses n would like an up to date fuse box.

I want to replace an old built in electric oven

  • Location: South Norwood
  • Hired: diligent electrical
  • Trade: Electrical
Job Description

Disconnect and remove built-in single electric oven and replace and commission new single oven.

MyBuilder for Tradesmen

Sign up
Register as a Tradesman
Express interest in jobs
Choose the jobs you want
Get Shortlisted
Job posters will add you to their shortlist
Win Work, Get Feedback
Positive feedback gets you more work
"Congratulating you on your efforts in helping small businesses reach more customers. We're really pleased to be registered with you."
MS Contractors
Locations
>Orpington
>Keston
>Chislehurst
>Bromley
>Swanley
>New Eltham
>Sidcup
>West Wickham
>Mottingham
>Bexley
>Avery Hill
Read about MyBuilder in the Press