Electrical jobs in Hertford, Hertfordshire

Job Description

I am getting the loft floor boarded shortly. I have been told that if I want to get lighting in there, I should do it before the boards go down.

I would like to get a quote for this work. It will need to be done in the next couple of weeks depending on cost.

Job Description

1 front outside light
1 bathroom spotlight
1 dimmer switch upstairs + downstairs not dimming

Job Description

Old shower to be removed and new power shower installed.

Job Description

I am owner of 3 bed semi-detached house. The current shower unit is a wall installed in the bath about 5 years ago. I have been advised the cabling is not correct for the type of installation which means not enough heat is getting through. The shower unit itself is loose. I believe I may need to replace the whole thing.

Job Description

Currently getting kitchen installed by B&Q, but they will not install my own appliances unless they do their own electrics. Cooker needs wiring in and connecting to Gas supply, Cooker hood also needs installing.

Gas supply and electrics in place for cooker install (Hood will need wiring - spur chased in wall?). Cooker does not seem to currently have a Gas bayonet - only a tap?)

Ideal start ASAP.

Let me know if you need any more information.

Thanks

Job Description

1. replace six double sockets and two three way light switches (we have the new ones, so it will just be labour)
2. remove and make good four double sockets
3. move two double sockets and set up wall ready for installation of wall mounted TV
4. remove a radiator and replace it in a different pace (which is on the adjacent wall) with a new double radiator
5 redirect some cabling currently in under stairs cupboard ready for re-configuration of staircase.

Job Description

hallway light bulbs keep blowing.-seems to be an electrical fault and would like an engineer to check

Job Description

to install a new plug socket on landing, and put in a dimmer switch on existing lighting

Job Description

2 hallway lights and 2 lounge lights need rewiring

Job Description

to fit garden flood light on a 2 bed house.Easy free parking on residential road.I have already bought the lights from B&Q.

Job Description

I'd like an electrician to fit an LED mirror in my bathroom and if possible, a plasterer to re-touch the area around this once the mirror has been fitted.

Job Description

I am in the process of fitting a new kitchen and need moving sockets and switches around to align with new kitchen applies.

Job Description

disconnect old electric cooker, reconnect new electric cooker

Job Description

A spare room needs converting to a study.

The existing mains points need doubling-up, and probably moving within the room.

An additional mains point needs to be created at near-ceiling height (to power a broadband modem wifi hub, whose mounting near the ceiling is preferable).

In classic English style, the room's door is hung the wrong way. This is also scheduled for solving, so its corresponding light switch needs moving to the right side of the door. The switch also needs to be a normal switch, replacing the dimmer switch currently in place.

An earth wire needs re-installation. It was hidden behind coving, but without the coving, it needs proper securing.

A lighting wire needs re-installation. It powers an outside light. It was hidden behind coving, but without the coving, it needs proper securing.

Your thoughts about network cabling (Ethernet) also appreciated. I want to have the room properly networked, with options for the rest of the property (in the short-term, wifi access elsewhere in the property will work).

Your thoughts about improving the room's lighting also appreciated.

The property was originally built in 1963. A kitchen-fitter installed a kitchen within the past 10 years and found old wiring (pre black/red), calling it "pyrocast" wiring. The property was earthed (without extensive re-wiring) and had a consumer unit installed in 2001.

I own the property leasehold.

Job Description

A light switch in a kitchen currently controls one outside light, and needs to be doubled-up to be an alternate light switch for the kitchen inside light.

The kitchen is currently lit by a single flourescent tube. Your thoughts about improving it - I'm keen on flood-lighting! - would be appreciated.

The property was originally built in 1963. A kitchen-fitter installed a kitchen within the past 10 years and found old wiring (pre black/red), calling it "pyrocast" wiring. The property was earthed (without extensive re-wiring) and had a consumer unit installed in 2001.

I own the property leasehold.