Driveways jobs in Barnsley, South Yorkshire

Job Description

Remove tarmac and excavate/re-level exising drive to meet new extention.
Install drive rainwater drainage across front of house
inastall 2 new Man hole covers
Lay & compact new sub base at 100mm approx 85 sqr mtr
remove 8 conifers along front boundry
replant new 6ft conifers
(new drive not to be laid yet - still undecided on what to do)

Job Description

We & our attached neighbours want to block pave the front of the properties to create two double drives. Currently both have a single drive & area of grass. We have the paving already. We want the job completed as one so the properties match.

Job Description

There are two areas outside my house about 20ft by 15ft and 10ft by 4ft that I would like to be paved.

Job Description

I am looking for quotes for someone to dig up existing concrete drive and relay. approx size is 10ft wide by 25ft long, on a slight incline.

Job Description

drive dips and slants. ?20 foot on longest edge.
may need supporting wall on one side.
want cellular plastic turf surface
quote to include materials
awkward access

Job Description

Job 1. Remove existing small concrete driveway (approx size 4 x 3 meters) and replace with block paving

Job 2. Remove existing single wooden garage door and frame and replace with 'up-and-over' white-finished metal door (non-motorised). Approx opening size 7' 6" wide by 6' 10" high

NOTE:- I would be willing to consider quotes for either the whole job or separate quotes for either job 1 or job 2. All quotes to be fully itemised and include all labour, materials, and removal and disposal of all waste materials.

Job Description

to excavate exising path and replace with stone flags, and replace steps

Job Description

Create level hard standing area for 2 cars from a front garden with a gentle slope. Including removal of garden wall (i could optionally do this myself).
No need for paving, just laying down hard core (i'll gravel over it).
Work to start ASAP.

Job Description

aprox 12 sq meters need to be block paved flags allready down need to be removed

Job Description

The job is to hang a set of driveway gates the posts are already in and just require the hanging brackets welding on these are also here and the gates levaling the width of the gap is 11ft from post to post and there is a slight slope from one end to the other but obviously the gates will need to be leval the gates are 5ft high.

Job Description

to block pave my steps,along with the other job i posted

Job Description

block pave drive labour only

* The following information was added Friday, 21st August, 2009 :
hi this is a concrete drive,so will need tools to break it up.price must be set and not per day.

Job Description

BLOCK PAVE FRONT GARDEN,SOIL DOWN AT MOMENT AND GRAVEL.NEEDS TO MATCH BLOCK PAVING ON BACK EACH BRICK 16/16CMS