Driveways jobs in Bolton, Lancashire

Job Description

Relay driveway and extend area to cover approx 50sq meters
Welcome quotes in flags, block paving or imprinted concrete

Job Description

Job is to flag space along side of house. Length 30 foot by an average width of 3 - 3.5 foot. Currently laid to decorative limestone chips . Boudary is house wall on one side & Waney lap fence the other. In addition I would like an existing waney lap "gate" replacing at one end of the to be flagged area ( width of gate approx 34" by 66" high) The concrete post the gate is fixed to will also need replacing.

Job Description

Lift and relay approx 2m of edging kerbs and relay approx 3m2 of 6x6 red and black quarry tiles

Job Description

Front drive and doorway, will need a quote not sure of measurements. We live in Tyldesley.

Job Description

Complete driveway, block paving, from road down side of house and around back.

Approximately 70 square meters

As part of the job is building a retaining wall in garden, I have the bricks for this.

Job Description

32 squared metres of block paving, dig up existing concrete drive all labour & materials to be included

Job Description

Lay the foundations and fit garden patio.

Slab Dimension
Assembled Dimension Depth 30
Assembled Dimension Height 4.5
Assembled Dimension Units cm
Assembled Dimension Width 30

Job Description

drive approx 46sq.m inclined, paving/tarmac?, demolish and rebuild garden wall approx 18 m long, short length of fencing and gate. - quote to include labour and material.
additional rebuilding of concrete stone garden bed wall (existing blocks to re-use)

Job Description

I need a drive way fitted 3m x 6m in gravel, part of hedge to be removed and 2 concrete posts installed at driveway entrance.

* Added 7th April, 2012 :
Quotes to include labour and materials please.

* Added 21st April, 2012 :
Decided to go for brindle block paving instead 3 x 7 driveway with a 4 x 1 path.

Job Description

to make a drive way at front of house,paving slabs, labour an materials to be included,flat

Job Description

The front garden used to have a lawn, which has been dug up and it now needs preparing for use as a driveway for two cars.

It has an incline and would appreciate having a quote for the area to be tarmaced and a quote for the area to be paved as we are undecided at present.

Also, there needs to be drainage put in due to the incline.

If you are able to come and quote for this job, please get in touch.

Thanks

Zoe

Job Description

Quote for 40 - 50 square meters of drive way.
Must have examples of work I can see near Bolton.
Payment on completition no monies upfront
I like either pattern imprinted conc or brick paving

Job Description

currently block paved but would like pattern imprinted concrete.

Job Description

Changing grassed area at the back of the property, into a driveway (concreted). gates fitted also at the end (approx 8ft and 3 ft).

Job Description

I have an existing blockpaved driveway and would like it extending in same material. It is circa 12m square.