Conversions - General jobs in Woking, Surrey

Job Description

Current: have 90's extension, brick, with 2.4m french doors. Catnic lintel in place already.
Require: widen opening to 3.2m to accomodate bi-folds. Strucural engineer states catnic CX70/100 (he assumes 75mm cavity) required, 3.5m+ in length (needs min 150mm overhang). Plans + planning permission already sorted, and building control fees paid.
Best quote so far is £2k. Looking for better - project downsized massively due to budget constraints.

Job Description

i have two rooms and i am interested in taking down the internal non load bearing wall that divides them, also moving a boiler and making good ceilings & floors

Job Description

We are looking for someone to knock down an internal wall between the the separate toilet and bathroom and to build small wall to cover one of the doorways. We also need the chimney breast removing from the living room.
Also to look at the possibility of a loft conversion.

A rough quote of the cost would be great
Thanks

Job Description

A partition wall in the bedroom needs to be removed. The debris will need to be cleared and any plasterwork or paint will need to be made good.

Job Description

Remove wall between kitchen and dining room, block work fill arch/wood work between dining room and lounge. Fit steel to padstones over wall space between kitchen and dining room. Relocate radiator and electics and make good as appropriate. I have structural plans from a suitable surveyor/engineer.

Job Description

Garage Conversion; Converting the back third of my garage into a laundry room.

To complete: put up a wall to divide the garage, plumb in the washing machine, raise the floor to the level of hallway, tile the floor, 3 x double sockets, strip lighting, plasterboard and skim (not paint), and knock a door through into the hall of the house.

The address is Campbell Fields, Aldershot, GU113TZ.

Job Description

A 3x5m single integrated garage for conversion to a study area. Work by previous owners was not up to the standards and hence it will need to be redone properly. There's an outside adjacent wc that needs to be integrated with the garage as well.

Please get in touch if interested and want to arrange a time to have a look.

Job Description

To insulate, add lighting/electricity and carpet a 6ft/6ft shed, to be used as an office... Also to waterproof shed.

Job Description

The partition between the kitchen and dining room of this 20 year old Bovis home approx 2.2 metres in length it to be partially removed leaving the lower half of the wall behind the kitchen cupboards. The door that divides the two rooms to go.

The lower part of the wall that contains kitchen cabinets is to stay and the work service extended to create a breakfast table allowing seating in the dining room. New kitchen surface exists for this job.

Finish and make good the ceiling and two walls.

Finish the floor where the wall is removed with tiles. New tiles exist to complete this task.

The finished product will be an open plan kitchen/diner with a breakfast bar where the wall existed. Access between the two areas will be a free and open space created by the removal of door and the wall up to the kitchen cupboards. A width of about 1.5 to 2 metres.

Job Description

I'm looking for someone local to widen the doorway between our dining room and kitchen from 33" to 59". It's a period property (1830's) with walls 15" thick.

If someone could inspect and provide a quote that'd be great.

Job Description

Would like a partial wall between hall and lounge and a sliding door

Job Description

A downstairs room has two sets of double doors on either side and I would like them removed and a stud wall put in their place. New electric sockets to be fitted at the time of construction. Possibility of the plasterboard ceiling being replaced at the same time.Two stud walls are about 2m x 3m. The ceiling is the same.

Job Description

Following regularisation application and building regs inspection, the following works need to be completed on a garage conversion to achieve approval(extract from inspection report):

1. The room formed requires a window with an opening suitable for escape. The opening should have a minimum dimension of 450mm and the openable area should achieve 0.33m2. The bottom of the opening should not exceed 1100mm above floor level (B1). There is already a window in place, but the dimensions do not meet those stated above.

2. The radiator should be fitted with a thermostatic radiator valve (L1)

3. The external wall must achieve a thermal U value of 0.45W/m2k. If not already insulated to this standard, either cavity fill insulation or the application on the internal face of 25mm of a Celotex type insulation and plasterboard finish will provide this (L1)

4. The internal block partition between the room and the remaining garage/store must achieve a thermal U value of 0.6W/m2k. If not already insulated to this standard, the addition of 50mm of a Celotex type insulation and plasterboard finish on the garage side of the wall will provide this (L1).

* The internal partition wall is approximately 10ft wide by 7ft high.
* The external wall is approximately 10ft wide by 7ft high.
* The current window is approximately 1m x 1m.

Job Description

Knock down internal brick wall between the kitchen and dining room
Steel required? ceiling joists run opposite direction to the wall
Make good ceiling, walls floors, plaster where necessary
Block up other internal doorway, plaster and make good.

Advise you visit to quote for works.

Job Description

I have a small (6x6) ground floor store room which is joined to my maisonette but only accessible through an outside door. I would like to get an internal door put in so that so that it can be converted into a laundry room. As part of the job I am looking to get the plumbing and electrics fitted for a washing machine and dryer and some surfaces built in as well as a heater/radiator installed. I would like the room to be fully functional as a laundry/utility room ideally with some storage cupboards. At the moment the room is empty apart from a couple of meters (gas and electric) and a light. I would like the job done some time in the next few months but I can be flexible on dates.