Conversions - General jobs in Rickmansworth, Hertfordshire

Job Description

I have a 17feet x 10feet garage in Rickmansworth london that i want to convert into a usable room. This would require the construction of a stud wall at one end about 4- feet from garage door. This would be a storage space with a door in the stud wall to allow entry. Can u give a quote, Number of working days required and start date for:

Garage conversion · Build stud wall to front of garage and include a door · Insulate stud wall with 90mm insulation · Baton and insulate all walls with 25 mm insulation · Fit external door frame and door in stud wall · Fit 5 lever lock and handle · Plasterboard and Plaster all walls · Fit skirting boards to match existing house · Paint walls and ceiling(1 base coat and 2 top coats) · Paint woodwork (white undercoat and gloss) · Convert electric sockets to plasterboard sockets   Material =     Labour   =     Total           = All rubbish to be removed from site Electric and water to be provided from site.
Thanks. Rehan

Job Description

We have an existing extension that wraps around the original external walls of the house. We are first looking to knock through parts of two of the old load bearing walls and adding RSJs to create an open-plan kitchen/diner in the existing space.

- New space will be approx 20ft x 20ft.
- We have necessary structural plans as required.
- Building control not yet notified.
- Builder, electrician and plumber required.
- We are owners of the property.
- Estimated Quote to include all works and materials.

As part of this, we are looking to:
- Remove two corner walls (both 6ft) and support appropriately.
- Open up the ceiling to create a vaulted ceiling (into the existing pitched roof)
- Add two velux windows
- Brick up one external door and replace with a window (remove existing lintel and add new lintel for window)
- New patio door
- Plaster walls and ceilings
- Install required electrical works (6 sockets plus kitchen requirements)
- Additional carpentry as required
- Remove existing bathroom and install new cloakroom toilet and utility room
- Install plumbing works (kitchen works into new location, plus changes to downstairs bathroom/utility room)
- Take up floor and lay drain for new sink position
- Install radiator
- Remove existing boiler and install new boiler in garage
- Move water-tank to garage.

Job Description

We are looking for a builder capable of removing a ground floor bearing wall and fit an rsj beam. The property is in St Albans city centre. The wall doesn't cover the full length of the room and therefore a support might be required to support the rsj beam on one side (I can provide a floorplan by email for better illustration). We are also looking at having a toilet fitted under a staircase.

We are looking to have the work done in late June

Job Description

Hi. i am looking to have a wall between my toilet and bathroom removed. It is not supporting as far as i know and is brick built. I may also need to have the wall re-plastered if you can provide this. I would also like to have the toilet doorway closed in. Please contact me if you need to know anything else or to arrange for a quote

Job Description

Wall removed in lounge, RSJ required...
Stud wall built across next room to make the lounge larger...
A radiator will need moving...
A doorway requires to be sealed up...

Job Description

Knock kitchen (14 x 10) into dining room ( 14 x 8 ) remove old kitchen . remove tiles , shore up chimney breast , refit kitchen and tiles . Plastering and possibly screeding.

Job Description

This is work to be done in a property we don't live in yet, purchase going through at the moment. The property is empty (vacant possession) and we are able to have access all day on Tues 25th Oct to get quotations for the following works.

This job is in three parts:
1) Knock through wall between kitchen and dining room, supply and fit steel, finish to decorating standard. Approx length of wall to be removed is 10'. Plus install new kitchen worktop (length approx 12m). Job to be done mid December.
2) Install new bathroom, removing old bathroom. No change in layout so plumbing work fairly limited. To include bath (with shower), sink, WC, floor tiling, wall tiling to one wall, removal old airing cupboard. Approx size of bathroom 9' x 9'. Job to be done mid Dec.
3) Garage conversion - conversion of existing intergral garage (22'6 x 9'4). Garage to be converted into study, small downstairs WC, and utility room. To inlcude removal of downstairs WC understairs, and conversion into an understairs cupboard. Work to be done Jan/Feb next year.

Job Description

Small cellar needs converting into habitable room, all electrics and plumbing to be tidied, walls and ceiling insulated and dry lined, electric box moved and refitted, small cupboards built, new lights to be fitted etc.

Job Description

I have a kitchen 3.5m x 3.3m at the rear of the flat, next to quite a lrge bathroom. I want to reduce the size of the bathroom and kitchen to create an extra bedroom. Planning permission not needed. If you're fantastic then there's potential for other work too.

Job Description

Side dormer conversion. Timber framed walls constructed and tile hung. Shell only needed.

Job Description

Convert the garage in to a room with a internal door, window in place of the garage door brick up external door.Fit out the inside insulation,plaster board, flooring and electrics. Include disabled ensuite suitable for wheelchair user ( shower, washbasin and toilet).

Additional works to create/modify internal access to room and external access (ramp)into house from existing front door.
Planning Approval not required, require full written quotes for applying for building regultions.

Works include :Blocking up existing opening to include window; insulating/laying new floor over existing; extending plumbing/eletrical services including drainage and heating and making good.

Competent and experienced builders familiar with disabled access requirements and current building regulations.

All materials, including UPVC window must be supplied by builder. Must be able to start asap. Liability Insurnace must be evident and produced at time of quote.

Job Description

Job Summary

Partial conversion of garage into a downstairs bathroom of approx 3 m x 1.1 m and an entrance / laundry of 3 m x 1.1 m, with conversion of adjacent porch area (2.45m x 1.8m) into a kitchen dining area.

Work will include :
· raising of floor level in garage conversion and porch area by approx 30 cm
· internal block / partition wall (approx 2.5 w x 2.5m h) at end of garage
· internal block / partition wall to side of bathroom area to divide the bathroom/ laundry areas (approx 3.0m x 2.5m h)
· external block wall (approx 1.45 w x 2.4m h) at end of porch with opening for double glazed window of approx 0.9m w x 0.3 m h, supply and fit said double glazed window to opening
· external block wall (approx 1m w x 2.4m h) to side of porch area with opening for window of approx 1m x .6 m, supply & fit of said double glazed window, and supply & fit double glazed French door (approx 1m wide) to opening
· removal of existing garage window & block infill of opening, (1.2m w x 1 m h)
· remove existing and supply and fit double glazed obscure glass window to proposed bathroom area (approx 1.2m w x 0.36m h)
· plumbing for downstairs toilet, basin and shower and fitting of same
· electrics as required for electric shower, power points (5) and lighting (2)
· plastering as required to make good walls and ceilings in extension
· supply and fit door for bathroom entrance

1. All work to comply with local and national building standards and regulations
2. All builders / contractors / sub contractors must be suitably qualified and have appropriate and current / valid certification.
3. All builders / contractors / sub contractors must have insurance cover
4. References will be required

Owner responsible for
· supply of bathroom shower cubicle, electric shower unit, toilet pan & basin
· tiling and floor coverings

All measurements are approximate with builder responsible for obtaining their own accurate measurements