Conservatories jobs in Leeds, West Yorkshire

Job Description

Looking for a conservatory approx 3m x 3.5m to come of a rectangular bay window facing a large back garden. Builder must be able to show us one he has done and use A rated windows. Can we get a quote for build only if we source from wickes or somewhere and a quote for the whole thing, work and supply.

Job Description

I have a leak where my conservatory roof meets the wall. It looks like someone has tried to bodge a fix it in the past but water is still getting in (I've only just moved in so not sure how long it has been a problem for). It is a upvc roof with brick built walls.

Job Description

Conservatory to rear of house - dwarf wall, size/options to be discussed. Will look at options of supply and fit & fit only depending on cost.

Job Description

Lean to conservatory, 20mm sheet polycarbonate roof. Where poly sheets are joined on aluminium strip fitted to joists, plastic topping strip has algae underneath - dries out in hot & dry weather, then when it rains, water finds its way under to joists & drips inside. Roof not strong enough for unsupported access - will need some means to spread load.

Plastic strips need to be cleaned as best as possible & silicone sealed down length either side where in contact with polycarb

Topping strips approx 80mm wide, 3m long, 4 off, roof area 3m x 5.5m

Job Description

dwarf walls and footing will be already done just to install it

Job Description

We have one window unit measuring 36" x 40" which has a defective seal and has misted up.
Can it be repaired or does it need replacing? No desperate urgency - next few weeks would be fine.

Job Description

My conservatory roof came off therefore needs putting back.

Job Description

hi, I'm looking to buy ex display conservatory currently in Leeds. It measures 3 meters square, full glass to 3 sides (one side needs to be full brick), full front folding doors and glass roof. Conservatory will need dismantling, transporting and rebuiding including wall and base in Colton, Leeds 15. I'm looking for initial estimation and anything else you may need to know. Many thank

Job Description

I have a 11 foot 4 by 9 foot 9 timber frame Victorian conservatory.

The roof needs replacing.

It current has 10mm polycarbonate roofing & I am upgrading to 35mm with heatguard.

I have sourced a supplier for polycarbonate sheets & all fixings.

All sheets will be cut to exact shape & size .

There are 6 rectangular sections & 6 triangular sections.

I need a quote for a professional with previous experience in this area , to remove part of the roof so the panels can be measured ( will need to be temporarily replaced ) & at a later date replace it with the supplied made to measure roof panels & fixings

I would like this work to be done withing the next few weeks.

Given the info supplied could I have some quotes please.