Chimneys & Fireplaces jobs in South Croydon, Surrey

Job Description

I have a fireplace that has been closed up. I intended to open it up at a certain stage and had a gas outlet fitted and ready at the side of the fireplace.

I would like to achieve a combination of Gas/Solid fuel fireplace, so I can light up the fire with Gas and then able to turn off.

The living room is to be decorated soon and considering laying laminate flooring so would like this job done prior to the decoration

* Added 13th March, 2013 :
The fireplace has already been opened and audited and chimney has been sweeped.
Currently purchasing a Gas only fireplace (verine meridian) which will require fitting. some of the brickwork will have to chipped away and probably the plaster around the fireplace has to be prepped.
This will be a hole in the wall installation on the ground floor
The gas outlet is already at the fireplace but may consider concealing the pipe if price allows

Job Description

We would like a hole in the wall decorative fireplace installed in the chimney breast of our dining room. The fireplace was plastered over by a previous owner and we have already removed the plaster to reveal the brickwork of the fireplace opening. We would now like a decorative hole in the wall type feature installed, so just an open box with a plastered finish and the surrounding chimney breast made good.

Job Description

2x fireplaces, existing hearth etc but not working

Need surround, hearth and inside to be prepped and fitted.

Job Description

Need a fireplace fitter.

I have taken back an old fireplace and need someone to Install a steel insert and firebox using fibreboard block, lay hearth and seal, fix and secure the fireplace surround and backfill insert with vermiculite and rubble to level height and flaunch gather for smoke dispersal and finally make good all internal areas to reduce soot build up.

I have attached a link to the suite I have (48” pine, slabbed granite, solid fuel with a push-in).

http://www.fireplacesareus.co.uk/shop/gallery-lincoln-wood-fireplace-with-lytton-cast-iron-arch.html

Job Description

I need quotes on capping my chimney to stop water/rain leaking down into the fire place. It's not masses amount of water, but is noticable on the fireplace and chimeny breast. I have a mid terrace house.

Job Description

Removal of current Marble Fire Surround and Marble slab where the fire place is located. Installation of new wooden mantle piece (quote required) and cast iron fire (fit only, we are sourcing one but if you have any that are available please let us know). Making good all plasterwork surrounding fire place.
We do not intend to use the fire at this point in time so chimney works are not required.

Job Description

Looking for someone to quote on how much it would cost to fit a wood burner in a newly discovered fireplace [looks like chimney is functional and roof is easily accessible]

Job Description

Before we can undergo some damp proof work we need to cap the chimney at the back of our house. There are two pots - I think one may be capped already, although am not sure. I can supply a photo of the pots to help decide whether one or two need doing. If you can supply the necessary cap as well that would be helpful (although not essential). House is a two storey Victorian terrace.

Job Description

Would like to have a brick fireplace and corner unit taken out ,and
all the waste removed once the job has been finished ,and it to be
tidy. Happy to send a photo if you are interested in the job if you
supply your email address .

Job Description

The three chimney pots on the single chimney stack of our victorian house were capped off many years ago. A chimney sweep told us we shouldnt have proper fires until uncapped. Therefore we want the caps removed and three pots of a style similar to that of our neighbours (same as in one of your photos) added in their place. Its worth noting the roof is 2 and a half stories up so a long ladder will be needed.

Job Description

we need some gallows brackets fitted in our loft space where the chimney brickwork throughout the house has been removed and the remaining chimney is unsupported.

Job Description

Hi there, need a stove fitting into existing fireplace. All prep work done and chimney swept and certified. Have stove, pipe, register plate and flue liner. Just need skilled fitter.

Job Description

I have a fireplace currently with a 1930's surround that needs removing, can be taken off whole. then a surround mounted and cast iron insert fitted, current opening is square shaped needs be altered to fit an arch shaped insert, needs fire cement etc, quite deep. bit of plastering around the surround to make good.

Job Description

Install a CL3 Multifuel stove
Fit Cowel
correct slipped tiles

Job Description

Previous fire was boarded over. Have done the messy work of removing old fire back + infill but require a professional to finish the job off.

* Added 16th February, 2013 :
Decorative only