Chimneys & Fireplaces jobs in Croydon, Surrey

Job Description

Need a fireplace fitter.

I have taken back an old fireplace and need someone to Install a steel insert and firebox using fibreboard block, lay hearth and seal, fix and secure the fireplace surround and backfill insert with vermiculite and rubble to level height and flaunch gather for smoke dispersal and finally make good all internal areas to reduce soot build up.

I have attached a link to the suite I have (48” pine, slabbed granite, solid fuel with a push-in).

http://www.fireplacesareus.co.uk/shop/gallery-lincoln-wood-fireplace-with-lytton-cast-iron-arch.html

Job Description

I need quotes on capping my chimney to stop water/rain leaking down into the fire place. It's not masses amount of water, but is noticable on the fireplace and chimeny breast. I have a mid terrace house.

Job Description

Removal of current Marble Fire Surround and Marble slab where the fire place is located. Installation of new wooden mantle piece (quote required) and cast iron fire (fit only, we are sourcing one but if you have any that are available please let us know). Making good all plasterwork surrounding fire place.
We do not intend to use the fire at this point in time so chimney works are not required.

Job Description

Looking for someone to quote on how much it would cost to fit a wood burner in a newly discovered fireplace [looks like chimney is functional and roof is easily accessible]

Job Description

Before we can undergo some damp proof work we need to cap the chimney at the back of our house. There are two pots - I think one may be capped already, although am not sure. I can supply a photo of the pots to help decide whether one or two need doing. If you can supply the necessary cap as well that would be helpful (although not essential). House is a two storey Victorian terrace.

Job Description

Would like to have a brick fireplace and corner unit taken out ,and
all the waste removed once the job has been finished ,and it to be
tidy. Happy to send a photo if you are interested in the job if you
supply your email address .

Job Description

The three chimney pots on the single chimney stack of our victorian house were capped off many years ago. A chimney sweep told us we shouldnt have proper fires until uncapped. Therefore we want the caps removed and three pots of a style similar to that of our neighbours (same as in one of your photos) added in their place. Its worth noting the roof is 2 and a half stories up so a long ladder will be needed.

Job Description

we need some gallows brackets fitted in our loft space where the chimney brickwork throughout the house has been removed and the remaining chimney is unsupported.

Job Description

Hi there, need a stove fitting into existing fireplace. All prep work done and chimney swept and certified. Have stove, pipe, register plate and flue liner. Just need skilled fitter.

Job Description

I have a fireplace currently with a 1930's surround that needs removing, can be taken off whole. then a surround mounted and cast iron insert fitted, current opening is square shaped needs be altered to fit an arch shaped insert, needs fire cement etc, quite deep. bit of plastering around the surround to make good.

Job Description

Install a CL3 Multifuel stove
Fit Cowel
correct slipped tiles

Job Description

Previous fire was boarded over. Have done the messy work of removing old fire back + infill but require a professional to finish the job off.

* Added 16th February, 2013 :
Decorative only

Job Description

I need my old and not working gas fire to be taken out and replaced with a new one. Ideally old one removed, then some advice as to best replacement model to get, and once purchased to have the new one fitted. Residential flat in Whyteleafe, Surrey.

Job Description

Hi,

We have a chimney in a bedroom where when there is rain, we hear drops coming down every so often, sometimes quite a lot.

There is some plastic shoved up the chimney for draft prevention and the rain hitting the plastic is quite loud. I figure it is a chimney cowel issue, but I'm not entirely sure...

Is this something you would be able to assess and take care of? The property is in honor oak park, SE23.

Kind Regards

Go Sugimoto

* Added 6th February, 2013 :
The chimney is disused as it stands and will most likely not be used in the near future. Perhaps a cowel but also solutions such as the below, to maintain ventilation but complete protection from rain, etc.

http://www.chimneycowlproducts.co.uk/acatalog/Disused_Chimney_Terracotta_Cap.html

unless otherwise its use it dissuaded.

Job Description

two chimneys which need checking, sweeping & possibly relining. Woodburner to be installed in one and 90cm stove in the other. If you can also take out the old gas fires and do the necessary amends to the fireplace hole then that would be great!