Chimneys & Fireplaces jobs in Pinner, Middlesex

Job Description

I have a ASAP Job, I need my Chim removal Please contact me ASAP

Job Description

Supply & Fit 2 Fireplaces & sweep chimneys

Job Description

I have an exposed fireplace that requires a suitable period fireplace to be installed and the hearth retiled. The building is an Edwardian terrace.

Job Description

We need our chimney lined (ideally with a 904 stainless steel flexible liner) and our multi-fuel stove installed - must be able to have the installation HETAS signed off.

There is also a bit of rendering work that needs to be done during/before installation above the stove on the chimney opening.

It is a two storey Victorian pub converted home.

Job Description

This is a sloping roof atop a two storey house. The job is straightforward,a few minutes, but reaching the chimney stack less so.

Job Description

“chiminey removal on ground floor and first floor and building support on the loft for the second chiminey...and insuring that the structure of the wall and remaining chiminey is not affected.”

Job Description

Need to bring in new chimney pot on the roof where the old one used to be. At the moment there is a concrete cap that covers the chinmey, so this will need to be removed to open up the chimney and reinstate the chimney pot. There is access from top floor flat.

Job Description

I am looking to purchase a property and the survey has suggested that the remainder of the chimney is improperly supported.

Job Description

Hi,

I need to get my chimney pots capper

Job Description

Remove chimney from lounge all the way in to loft and capit of in the loft with supports, make good floor's and cellings ,block up side garage door, fit new pots through out the house and replaster all the cellings in the house .

Job Description

Living room chimney failed smoke test - smoke came out of three pots. Has clay ridge tile cap currently but needs 24" chimney pot or similar fitting. Leak may simply be within chimney stack (no smoke in other rooms). Chimney currently has scaffolding platform all round it with easy access. Chimney has been swept. job is to render (or similar) within top of chimney stack, remove ridge tile and fit suitable cap, smoke test again

* Added 27th October, 2011 :
Also supply chimney cap and any other material (eg cement mix)and remove any rubbish

Job Description

Small 4kw wood burner, sweep and install chimney liner. Position, fix and connect stove to flue.

Job Description

Installation of 3 chimney cowls on the chimneys on the roof of the mid terrace house of 2 floors. Cowls are provided. Quick quote is appreciated.

Job Description

Need our chimneys capped to prevent rain coming down our chimney stack.

Job Description

Open up a fireplace and install open fire, move some boxed wiring (runs across the front of the chimney) & embed into the wall, make any repairs needed to chimney, fit suround & make good inside (i.e. remove existing lining paper from the walls, hang lining paper and paint). We're looking for someone who can provide examples of their previous work. Looking to get the work done quickly & I'm currently housebound, so quote any time with an immediate start.