Chimneys & Fireplaces jobs in Stevenage, Hertfordshire

Chimney breast removal

  • Location: Welwyn Garden City
  • Hired: Custom build and maintenance
  • Trade: Chimneys & Fireplaces
Job Description

We want to take out the chimney breast and surrounding walls on the ground floor to open the adjacent 2 rooms. Adding structural beam to support existing chimney above. Ages of house is 1930's semi.

Require chimney and fireplace

  • Location: Letchworth Garden City
  • Hired: K Greenlees Pointing Contractor
  • Trade: Chimneys & Fireplaces
Job Description

Hi,

I have recenly purchased a house in letchworth and require someone to fix the chimney (pointing and possible leading).

Thanks,
Rich

Fireplace removal, laying of hearth & plastering

  • Location: Letchworth Garden City
  • Hired: D.C.S PLASTERING/GENERAL BUILDING
  • Trade: Chimneys & Fireplaces
Job Description

Hi,

Looking for someone who can remove a Victorian fireplace for us and tidy up the void that's left with a simple rectangular space for a grate, with plastering and a reclaimed red brick hearth if possible.

We also need various plastering jobs done around the house, but appreciate we may need 2 separate contractors. These are hiding pipes, re-plastering bedroom walls (wood cladding has been up)and some minor work covering holes where lights have removed.

Cheers

Bob

Structural steel install for pre-removed chimney breast

  • Location: Luton
  • Hired: HUNBuild Ltd.
  • Trade: Chimneys & Fireplaces
Job Description

The installation of a structural steel to sure up a chimney breast removal.

Full engineering plans are supplied, the steel, bricks, mortar etc are all supplied in the loft - labour required.

References of previous buildings regs approved work are essential

Repoint/Rebuild Chimney

  • Location: Letchworth Garden City
  • Hired: Pinnacle Property Maintenance
  • Trade: Chimneys & Fireplaces
Job Description

We require a fixed price quotation including all materials (including the hire and erection of scaffolding, if required) and labour to repoint or rebuild a chimney.

Woodburning staove installation

  • Location: Hitchin
  • Hired: D.C.S PLASTERING/GENERAL BUILDING
  • Trade: Chimneys & Fireplaces
Job Description

Strip out existing fireplace to make way for new stove and lay hearth. Make good walls.

Replace exsiting wooden cupboards either side of chimney with new.

Installation of flue liner for wood burning stove

  • Location: Harpenden
  • Hired: TCS Fluesolutions
  • Trade: Chimneys & Fireplaces
Job Description

Supply and fit twin skin construction multi-fuel flue lining (approximately 8 - 8.5 meters), new anti-downdraught suspending cowl, adapter to stove flue and lower register plate. Make all necessary connections between parts.
Fill the stack void between flue liner and chimney brickwork with Vermiculite insulation.
Installation/approval by HETAS approved installer required.

* Added 27th September, 2010 :
Detached house with approx 3 meters of level clear space to side of gable wall with chimney stack, to allow ladder access to chimney pots. Wood burning stove to be supplied by building owner.

* Added 27th September, 2010 :
Contact Adrian on 01582 768960 if any queries.

Damaged chimney? Hatfield

  • Location: Hatfield
  • Hired: peter dolling property maintenance
  • Trade: Chimneys & Fireplaces
Job Description

Hi

I live in Hatfield, Herts in a terrace house.
About 2 years ago i had a new fire installed, chimney swept etc.
Recently a lot of 'brick dust' has been falling down my chimney into the front room.
I've had a look outside the front and back of the chimney, but cant see anything obvious.
Looking for someone to come round ASAP and have a look and check it out for me
Is this something you can do?
If so, roughly how much would i be charged for you to take a look?
Please reply with a telephone number

Many thanks

Lina

Reinforce chimney

  • Location: Welwyn
  • Hired: WW Bespoke Joinery and General Contractors
  • Trade: Chimneys & Fireplaces
Job Description

Reinforce chimney breast

chimney base needs tiying up

  • Location: Stevenage
  • Hired: Nick Construction
  • Trade: Chimneys & Fireplaces
Job Description

Our fire is open on two sides we require one side closed off, will take 1 square metre of area to accomplish this. Then the chimney wall will need plastering from ground to 1.5m high this a central column so 3 sides will need this plastering. Total area of plaster 5 metres. Finally a fire surround installed to make it look good.
Work required to be completed within two weeks from this date.

Remove existing large brick open fireplace and chimney

  • Location: Harpenden
  • Hired: WW Bespoke Joinery and General Contractors
  • Trade: Chimneys & Fireplaces
Job Description

Removal of the existing large (approx. 127cm wide, 58cm deep, runs to ceiling) open fireplace made of brick. Chimney to be removed at least from living room (it runs up into main bedroom and loft). Make any needed repairs to wall, living room ceiling, main bedroom floor (and ceiling if necessary), and roof if necessary. Plaster etc to complete.

* Added 7th July, 2010 :
For quoting, I would prefer a visit to see the work required, to get a more complete idea of what's involved.

Chimney Removal or Restoration

  • Location: Ware
  • Hired: HUNBuild Ltd.
  • Trade: Chimneys & Fireplaces
Job Description

Chimney on a two bedroom victorian house in Ware needs either repair or removal. At present chimney leans slightly towards house and there is a long standing crack in the chimney breast in the loft. Mortor in loft area is also starting to become powdery and needs repointing.

Work needed is either removal or repair of existing Chimney, and repointing of loft area and chimney breast. If deemed necessary removal of chimney breast in loft area could be good.

Chimney stack repair

  • Location: Welwyn
  • Hired: JEFF-MAC
  • Trade: Chimneys & Fireplaces
Job Description

Replace soft and spalling bricks and flaunching and repoint upper part of chimney stack on two storey 1968 detached house.

Job date after 5 October.

Remove chimney breast from grndflr reception room

  • Location: Letchworth Garden City
  • Hired: kwbrickwork building with confidence
  • Trade: Chimneys & Fireplaces
Job Description

Remove chimney breast from groundfloor reception room. (The remaining chimney breast on the first floor and in the loft has already been removed). Re-plaster wall and replace skirting and picture rail (wall width approx 290cm)

Just in front of the chimney breast there is a connection for a gas fire. We need this somehow 'capping off' under the floorboards.

The chimney breast also has a electrical socket fixed on it. This will need re-siting and we could do with another socket being added.

Finally, we would ideally like this work to be carried out before the end of May.

reline chimney and fit birdguard

  • Location: Hitchin
  • Hired: Fireplace and Stove Centre Agatestoneworks
  • Trade: Chimneys & Fireplaces
Job Description

I think the chimney needs relining as when we light the fire we can smell smoke in the room above the fireplace and there is debris coming from the chimney

MyBuilder for Tradesmen

Sign up
Register as a Tradesman
Express interest in jobs
Choose the jobs you want
Get Shortlisted
Job posters will add you to their shortlist
Win Work, Get Feedback
Positive feedback gets you more work
"Excellent website! I have been a member of other lead websites and MyBuilder is by far the best."
ddf-windows-ltd
Locations
>Stevenage
>Knebworth
>Hitchin
>Letchworth Garden City
>Welwyn
>Baldock
>Welwyn Garden City
>Buntingford
>Ware
>Arlesey
>Hertford