Central Heating jobs in Dartford, Kent

Job Description

Hot water not working possibly a fuse gone?

Job Description

My boiler will not turn off...

Job Description

We've just had a survey done on a 1930s semi we're buying and these are the key things needing doing...

1. Install central heating - we're just awaiting a connection to mains gas so there is currently no pipework etc. (We'd like to discuss cost of possibly having under-floor heating on the ground floor). There are a few electric heaters that will need to be removed.
2. Remove the immersion heater from the bathroom cupboard.
3. Fit a shower in the bathroom.
4. Check pipework in the kitchen.
5. Clear out the water tank and install a lid.
6. Inspect the water system - is there lead piping? Lead underground mains pipe? If so, replace.

Job Description

I am looking for a corgi registered plumber to quote for a power flush. I have been advised this is why my boiler is not working efficiently. I have 9 radiators in the house. I have already been quoted £350 so if you think you can do a good job for less than that can you get in touch.

Job Description

Hi I would like a couple of jobs done, these are:
1. Move radiator location and replace old radiator with new one. (Aprox. 3.5 metres)
2. Move combination boiler 1 metre

Job Description

If I switch my heating on it only works on full.I can not turn it down.I am told the pump is calling for hot water.

Job Description

Hi,
My old glowworm boiler started leaking so I will need to replace it. Ideal solution seems to be combi boiler in the loft.
Alex

Job Description

Supply and fit new a rated boiler, Worcester greenstar or similar standard suitable for 3 bed 1 bath house.

Job Description

I have built a self contained smallish building (55 square meters) in my back garden, I am looking to put the first fix plumbing (bathroom and kitchen) plus a full heating system in. The heating would need an LPG boiler and all pipework, radiators are already bought

Job Description

I currently have a cylinder hot water heater (cold water feed tank on top) and separate Salamander pump in my flat (no central heating, hot water only needed for shower and taps). The pump was replaced a month ago as the old one was leaking and very noisey. I was advised that the cylinder heater would need to be replaced soon as sediment and limescale had built up and this is the reason the water pump cannot supply hot water at the moment. (originally the new pump was installed with a surrey flange but this was removed a few days later due to blockages from sediment the hot water couldn't flow and pump stopped the second hot taps/shower switched on - this is situation at present) I've been given a nearly new boiler, same as this http://www.shop4-waterheaters.co.uk/product.php/387822118/redring_45551860_psa12_powerstream_ascari_white_steel_central_heating_hot_water_flow_boiler_4kw_12kw_230v/a127aa5eca58be5884d62b653546770b
Ideally if this boiler can be modifed (as central heating not required) with labour and part costs that make it worthwhile that would be great. If this is not advisable I'd need you to supply and fit a cylinder hot water heater/immersion (or let me know what cylinder/parts to buy and where and i can supply) connect up to the pump (checking no blockages in pipes) and dispose of old cylinder. Bascially I'd just like my hot shower and taps working in the cheapest way possible please! I have some photos of the current set up I can send you if it would help.
Thanks
Cheryl

Job Description

Service of Baxi back boiler.

Boiler working ok but last known service took place 2010.

Job Description

Have taken a rad off the wall but whole system needed draining down as no valve present on return side. Cant re-fill system, have tried everything but wont re-fill and the way it has been done up in the loft i have never seen before, gravity fed system but no seperate expansion tank, its all done of the main cold tank, vents as well and both my normal plumbers have said system has had it, all needs to be re done. They are both booked up for at least a month so i am looking to get someone in to suggest some ideas and give the cusomer a few quotes, obviously the quotes will go to the customer as i am just acting as a middle man. The couple are quite old and quite poorly and because i cant re-fill the system they have been without hot water and central heating yesterday and all today so im looking to get quotes done asap. I will show everyone who is shortlisted round so you can get an idea of the layout but in terms of the best system to put in i have no idea, my knowledge is only limited.

Job Description

I need most of the radiator valves on my central heating system replaced. There are 13 rads and 2 heated towel rails. All but 2 or 3 of the rads/rails need valves replacing. Would want system rebalanced on completion of work.

Job Description

Remove existing radiator and move pipework to install new designer radiator. Existing radiator standard white type, circa 3 ft long. New radiator is 300mm wide and 1500mm tall. This will be set approx two foot to the right of the existing radiator so pipework will need to be moved across to fit. Wall is insulated exterior wall with plasterboard finish.

Job Description

Looking to replace 4 radiators in the house due to poor performance, possibly full of sludge & external rusting. Small double in kitchen, large single in bedroom, large double in lounge & a small double in lounge. The small double was actually removed last year as it fell off wall so a bit of pipework will be needed too. Happy to get you round for quote or feel free to give a ballpark cost. Will need you to measure required radiator sizes, supply & fit, possibly including TRV's or new valves as appropriate & then balance system as appropriate. Also have a radiator in conservatory which was spurred off a radiator in Dining Room. It never really gets hot so would like a better solution if possible on your advice.