Central Heating jobs in Romford, Essex

Job Description

Just bought a house. Radiators are in silly places. In four rooms they need to be moved to under the windows. Two of the windows are bays. Gas-fired ch.

Job Description

Might be the termostate but the boiler and heating is fine but no hotwater if heating is switched off.

Job Description

Hi

The hot water on a 7 month old 24kw Potterton Titanium combi boiler is playing up. It appears that the secondary heat exchanger needs a clean.

The hot water gets too hot and then the boiler stops heating for a few seconds and then heats and this happens repeatedly. The effect on the hot water tap is that the hot water comes and goes every few seconds. Heating is working ok.

It is probably my fault as I replaced some radiators after the boiler was installed but waited too long to add inhibitor!

FYI I have just added Sentinel X400 cleaner into the system and will add X100 inhibitor after I drain the system in a few days/weeks. Hopefully this will mean no more problems hot water problems in the future once the heat exchanger has been cleaned.

I am looking for a quote for someone to clean (not replace) the heat exchanger. Gas Safe people only please.

* Added 28th April, 2013 :
Additional information:

- I do have a magnaclean fitted.

- I haven't considered the warranty option yet because I thought that as I hadn't taken proper precautions before fitting my new radiators it wouldn't be covered.

- The system had been powerflushed when the boiler was fitted back in October but I then decided to replace some of the old radiators one by one over the winter. I left 3 radiators but as I didn't add any inhibitor I guess these would have corroded over time.

- The original installer has already cleaned the heat exchanger once for me 2 months ago as a free favour and told me to run some cleaning solution and then add inhibitor but due to my lazyness in the cold weather I delayed too long and the problem returned.

- I will consider replacing the remaining 3 radiators. I haven't done this already as the pripework needs adjusting for these and I can't do that. However, my current priority is to get my hot water back.

Job Description

Central heating works fine, only when hot water turned on, there's a bit of noise coming from the boiled and a light indicator for "d.h.w. excessive temperature on primary circuit" comes on. The boiler is under two years old.

Job Description

Hi,
My old glowworm boiler started leaking so I will need to replace it. Ideal solution seems to be combi boiler in the loft.
Alex

Job Description

Hello all

I have a fairly new combi boiler( 2 years). Only a few days ago the radiators stopped heating up but we still have hot water.

Thanks

Job Description

REPLACE GAS BOILER AND RADIATORS; EXISTING BOILER IS ABOUT 20 YEARS

Job Description

I have an annex attached to my house and we require a radiator to be fitted. We have central heating in the main building it is a combi system

Job Description

My Vaillant boiler is not working properly, I have been told by a British Gas engineer that the heat exchanger needs to be replaced. I'm looking for a quote that includes materials and replacement part.

Job Description

My BIASI combi boiler makes some cracking noices & the fire goes off before much heating the central heating water. So the radiators are not heated properly. I think just need to change any damaged part.

Job Description

I would like the towel warming radiator changed for a new one. we have gas central heating.
i could buy the new one if advised on best one or you could get one that suits us.

Job Description

I currently have a cylinder hot water heater (cold water feed tank on top) and separate Salamander pump in my flat (no central heating, hot water only needed for shower and taps). The pump was replaced a month ago as the old one was leaking and very noisey. I was advised that the cylinder heater would need to be replaced soon as sediment and limescale had built up and this is the reason the water pump cannot supply hot water at the moment. (originally the new pump was installed with a surrey flange but this was removed a few days later due to blockages from sediment the hot water couldn't flow and pump stopped the second hot taps/shower switched on - this is situation at present) I've been given a nearly new boiler, same as this http://www.shop4-waterheaters.co.uk/product.php/387822118/redring_45551860_psa12_powerstream_ascari_white_steel_central_heating_hot_water_flow_boiler_4kw_12kw_230v/a127aa5eca58be5884d62b653546770b
Ideally if this boiler can be modifed (as central heating not required) with labour and part costs that make it worthwhile that would be great. If this is not advisable I'd need you to supply and fit a cylinder hot water heater/immersion (or let me know what cylinder/parts to buy and where and i can supply) connect up to the pump (checking no blockages in pipes) and dispose of old cylinder. Bascially I'd just like my hot shower and taps working in the cheapest way possible please! I have some photos of the current set up I can send you if it would help.
Thanks
Cheryl

Job Description

Remove existing radiator and move pipework to install new designer radiator. Existing radiator standard white type, circa 3 ft long. New radiator is 300mm wide and 1500mm tall. This will be set approx two foot to the right of the existing radiator so pipework will need to be moved across to fit. Wall is insulated exterior wall with plasterboard finish.

Job Description

I would like to move swap 2 radiators position

Job Description

Hello, I've been told that before a plate can be installed in my vaillant combi boiler, I have to have the pipework cleaned first. The property is a 4 bed eot house and the drain valve for the heating system is at the front of the property facing the driveway. The boiler itself is on the 1st floor landing in a cupboard. I need to have this done asap and for the right price