Carpentry & Joinery jobs in Huddersfield, West Yorkshire

Job Description

The fire door between our garage and utility room is draughty, has no fire strip and the lock is failing. We'd like the door bringing up to modern fire standards, either with a full replacement, or rennovation of the current door. We'd definitely need a better lock and handle for the door.

Job Description

Hi, looking for a carpenter in the area to install 2 new veneer doors into 2 separate pocket sliding door systems. Each door requires a channel to be routed into the bottom of the door (10,3 x 17 mm) plus installation of circular flush handles 48od and finger pulls in door edges 25od.

Job Description

Most of Stair Treads damaged when carrying wardrobe downstairs
Need repairing and carpet refitting

Job Description

Have a metre wide wooden gate positioned between 2 concrete walls. Gate has come loose and needs fixing to walls.

Job Description

I require a wooden wardrobe building and installing in my home. Dimensions are 70 inches wide by 100 inches tall. Should have cupboards at the top and drawers at the bottom. Also, need some shelving putting up. Thanks.

Job Description

Skirting required for the following:
Entrance hall at the bottom of the stairs (approx 4 square foot)
Staircase skirting (16 steps in total, first 14 all in one section then 2 further steps at the top of the stairs in the right, there are no rounded corners)
Top of the landing and the hallway, approx 20 feet in length for the whole thing)

Job Description

Three internal doors to be fitted.

Two coats of Polyx hard wax oil to be applied to 4 x internal doors.

Approx 5m of kitchen plinth to be refitted due to new flooring.

2 x 1.8 m handrails to be fitted to stairs.

Hook, or similar, (heavy duty) to be fitted to wooden beam.

We will supply all materials, fittings etc.

Job Description

I have a 4 meter and 3 meter American Black Walnut worktops that need cutting to size and installing in place of existing ones.

The easy part is that the worktops can be easily removed without breaking any tiles and the new worktop is the same height and will slot in in place.

The harder part is that the two worktops need to be joined together into an L shape (meeting diagonally into the corner of the room, joined with a biscuit cutter), while the two walls that the worktops will sit against might not be 100% square.

I also need a cutout for a new sink and a new hob.

The worktops cost £600 so I need someone who can measure and cut accurately first time!

Job Description

Hi,

I am looking for a joiner who will collect the door for me and fit.

I need this completing fairly soon.

Thanks

Job Description

The bottom few stairs are creaking and need repairing

Job Description

Build new boiler cupboard with door under new staircase.Panel under stairs and under treads with ply to a good finish.
2nd job box out around old pipework where old boiler was. stud and plywood to a good finish...

Job Description

the boiler was replaced and the cupboard was not put back up, so needs shortening and pipes boxing in

Job Description

To supply and fit skirting boards in lounge. One wall is a stone wall so is not straight so would need advise on this.

Job Description

Assess condition of front door and adjoining windows, and patio doors. Repair or replace as necessary.

Job Description

Our cellar is being converted and the walls now need to be studded so that they can be insulated and plastered etc There are ares which need hiding by cupboards made too?