Win a £3000 kitchen makeover! Enter Britain's worst kitchen competition.

Carpentry & Joinery jobs in Essex

Fitted wardrobe,Fitting Door,Sliding door repair

  • Location: Chelmsford
  • Hired: max barnard
  • Trade: Carpentry & Joinery
Job Description

1. Bedroom sliding door repair:-Top fitting for Sliding Door to be replaced and sliding door rail needs to be raised.
2. Fitting a door to a cupboard with lock (roughly 160 cm x 104 cm)
3. Fitting a fitted wardrobe with sliding doors to bedroom 2 & 3
4. fixing an over mantle mirror 118 x 90 cm
5. Fixing a Rectangular Drilled Mirror in the bathroom
6. Fixing tooth brush and Tumbler Holder in the bathroom

Change rebate on internal French doors

  • Location: Maldon
  • Hired: DW Carpentry
  • Trade: Carpentry & Joinery
Job Description

Change the opening of internal French doors, at the moment the right hand door opens first. Rebate on both doors need planing off and new rebates screwed on glued on. Change door lock from left door to right door ready for painting. ( Can deliver and collect small job).

box in pipes in small bathroom

  • Location: Dunmow
  • Hired: cml carpentry and maintenance
  • Trade: Carpentry & Joinery
Job Description

iv got 4 water pipes in my bathroom that i want boxed in approx 5ft long /1.5ft high /3in deep

External door - Supplied and fitted Quotes please

  • Location: Chelmsford
  • Hired: DSJ
  • Trade: Carpentry & Joinery
Job Description

Standard single sized door needs replacement 2.5ft x 6.6ft. Based in Chelmsford Essex.

* Added 4th February, 2014 :
.

Install a door in the side of our garage.

  • Location: Maldon
  • Hired: Scarlett Paving & Carpentry
  • Trade: Carpentry & Joinery
Job Description

We have a large double garage, with only the large garage doors.

I'd like a side door installed. The garage is timber clad, and internally it's breeze blocks.

mitre kitchen worktop

  • Location: Wickford
  • Hired: Hammertime Uk
  • Trade: Carpentry & Joinery
Job Description

Hi i would like a quote to have one mitre joint cut and the length cut on two laminate worktops.

making a platform

  • Location: Maldon
  • Hired: TimberLeaves Carpentry and Lawn Care
  • Trade: Carpentry & Joinery
Job Description

Making a platform 3ft by 3ft with a depth of 4inches, non slip on top where chair will sit i.e. raise swivel chair, I am disabled and housebound so need this chair raised

Cutting and installing single breakfast bar in kitchen

  • Location: Chelmsford
  • Hired: DW Carpentry
  • Trade: Carpentry & Joinery
Job Description

We are adding to our existing kitchen and have a 3m worktop, newly delivered, which we need forming into a 1.8 metre breakfast bar to be joined onto a bare wall and supported by legs (which we have). We would like the sharp corners of the breakfast bar smoothed or angled to be safe, and just need a good job to match the rest of the kitchen.

Fit skirting boards

  • Location: Billericay
  • Hired: J Parr Carpentry
  • Trade: Carpentry & Joinery
Job Description

Room approx. 7m x 3m. 7 internal corners and 7 external corners.
Skirting is 170mm x 4200mm. (5 lengths)

Front door sticking

  • Location: Witham
  • Hired: cml carpentry and maintenance
  • Trade: Carpentry & Joinery
Job Description

My front door is jamming and not opening /closing as it should, I've had a look and it seems to be catching at the bottom so would like the door removed trimmed/planed and re fitted

Front door

  • Location: Braintree
  • Hired: CBC Carpentry and Builders
  • Trade: Carpentry & Joinery
Job Description

Replacement door needed soon. Need someone professional.

Gazebo doors

  • Location: Chelmsford
  • Hired: DW Carpentry
  • Trade: Carpentry & Joinery
Job Description

Gazebo doors damaged by wind. Light weight doors need fixing or replacing. Most likely replacing. Looking for carpenter who could fix of make new similar doors.

2 x wooden floors in total 35m2

  • Location: Maldon
  • Hired: max barnard
  • Trade: Carpentry & Joinery
Job Description

I'm looking for a joiner to fit 2 floors for me: lounge and dining room

New loft hatch

  • Location: Maldon
  • Hired: cml carpentry and maintenance
  • Trade: Carpentry & Joinery
Job Description

I need a new loft opening with a new hatch fitted and the old opening plasterboarded and prepared for plastering.

Build wardrobe in alcove

  • Location: Ingatestone
  • Hired: dave pierce carpentry
  • Trade: Carpentry & Joinery
Job Description

Alcove in bedroom, want fitted wardrobe built (using walls as carcass) with shelving, rails. Doors to be made out of m d f and made ready for us to paint.

MyBuilder for Tradesmen

Sign up
Register as a Tradesman
Express interest in jobs
Choose the jobs you want
Get Shortlisted
Job posters will add you to their shortlist
Win Work, Get Feedback
Positive feedback gets you more work
"Just a brief note to thank you all for the work I have had from your site in the recent months. It is a fantastic way to find jobs..."
Alan Mitchinson
Locations
>Essex
>Chelmsford
>Ingatestone
>Witham
>Billericay
>Wickford
>Ongar
>Maldon
>Dunmow
>Braintree
>Brentwood