Building jobs in Dartford, Kent

Job Description

small side extension & new patio. Plans done, drawing are available by email at request.

Job Description

Three garden sheds need re-felting, sheets of wood will need replacing on one shed.

Job Description

Bathroom and utility room refit, including a load bearing wall removal and creation of a new, smaller utility room.

Bathroom:

The existing bathroom suite needs to be completely removed.
The load-bearing wall between this bathroom and the current utility room on the right hand side needs to be removed (about a 2m gap) and a new beam/plinth installed.

A new bathroom suite needs to be installed (bath, sink, toilet and free-standing double shower cubical) in the extended bathroom. The shower will be a power-shower running off the combi boiler. Bathroom walls, shower and floor need to be tiled. The new suite can make use of existing plumbing.

A new mirror, with a light above it and a shaver socket needs to be installed above the sink.

Utility room

The existing washing machine and dryer are to be moved into new utility room which will be accessed from the bathroom.
In the existing utility room there is currently a non-functioning shower cubical, a toilet and a sink which will need to removed.
The new utility room floor is to be covered in waterproof vinyl flooring. The dryer needs to have a vent installed on the outside wall - dryer to be installed against the outside wall.
The new utility room can make use of existing plumbing.

A new partition wall needs to be installed between the utility room and adjoining bedroom - this is currently a sliding door.

In both rooms a new ceiling needs to be installed with spot lights in the bathroom and a standard light fitting in the utility room.

Skills required - builder, bathroom fitter, plumber, electrician, plasterer, carpenter, tiler, floor fitter

For all the jobs the builder needs to supply the materials, we will advise on the style of the bathroom suite, and colour / type of tiles and laminate flooring

Rough plans can be provided on request but detailed plans and structural calculations need to be made. The job needs a building notice from the council.

We wish the work to start in mid-March and be completed by the end of April 2013 at the latest.

This job is at the same property as the other posting I have made (username mwilson73)

I am the homeowner.

Job Description

To instal brick vent by the side wall

Job Description

Existing gatepost pushed over by vandals - bricks look capable of being reused. Probably have post built to lower size to match neighbour's post so some material would need to removed.

Job Description

smaller job first: rake out and repair/repoint brick wall running down side of garden. Approx 3 ft high and 40 ft length. I would like this done as soon as is possible so I can then fix my garden fence to it.
Large job later in year: remove external render from right flank wall, repoint wall using lime mortar. replace bricks as necessary, which are London Yellow Stock. Size of wall is 3 storey Victorian townhouse. This will be a late summer job when I have the funds.

Job Description

Remove existing tiles from bathroom, plaster walls and tile part of bathroom. Box in pipes and make good ceiling. Turn bath round and put up shower screen and bath side panel. Plumb in dishwasher and plumb washing machine so it doesn't empty in sink. Decorate kitchen and put up two blinds. Replace part of skirting board in hallway.

Job Description

ALSO NEED EXISTING SUPPORTS/STRUTS IN LOFT IMPROVED. WE HAVE A 2 BED HOUSE IN CHISLEHURST.

Job Description

I am looking for a bricklayer to build and external wall for me.

6.3m long, 9 course with horizontal slates and vertical engineers running along the top

Job Description

the guttering downpipes overflow and flood the garden instead of draining away

Job Description

Would like to have a brick fireplace and corner unit taken out ,and
all the waste removed once the job has been finished ,and it to be
tidy. Happy to send a photo if you are interested in the job if you
supply your email address .

Job Description

Hi

I am looking to have 3 sections of Balustrades installed (layed) onto existing concrete block pavers.

Section 1 -

2 x pedestals (with base and tops) 300mm x 300mm
2 x Base and top rails) 200mm x 600mm
5 x Balustrades

Section 2:

2 x pedestals (with base and tops) 300mm x 300mm
6 x Base and top rails) 200mm x 600mm
11 x Balustrades

Section 3:

2 x pedestals (with base and tops) 300mm x 300mm
1 x Base and top rails) 200mm x 600mm
2 x Balustrades

Balustrades already provided, just looking for them the be cemented together

Job Description

Removal of load-bearing interior wall between 2 rooms, approx 3m wide. 1906 mid-terrace.

Installation of beam to support load on concrete padstones. Satisfy building regulations with council inspection and certificate. Plaster to finish ready for decoration.

Job description and beam/padstone calculations already obtained from structural engineer.

Job Description

We would like a wall at the front of the house. It will need to be a curved wall and not too high. Need advice and a quote as to what we need. Thanks

Job Description

The three chimney pots on the single chimney stack of our victorian house were capped off many years ago. A chimney sweep told us we shouldnt have proper fires until uncapped. Therefore we want the caps removed and three pots of a style similar to that of our neighbours (same as in one of your photos) added in their place. Its worth noting the roof is 2 and a half stories up so a long ladder will be needed.