Building jobs in Northamptonshire

Job Description

I have about 3.5sqm of plastering to do over 3 areas following water damage. I also have (half finished) repointing and stone repairs in a .5 to 1m stripe down the front of my cottage behind the downpipe. (No prizes for guessing what happened!) The stone repair resulted from a previous owner slapping cement all over and my trying to remove it. The stone is Northamptonshire ironstone.
I have some experience in working with lime and started the outside job myself - but I just don't have the time to complete it.

Job Description

put together and install wooden shed base kit and erect 6x4 shed in garden

Job Description

erect summerhouse either 7x7 or 8x10 size maybe lay base

Job Description

I'm looking for someone to clean up a damp cellar and damp-proof it using a membrane (Newton or similar). A sump pump may be required and there is a sewer access which will need to be properly covered but also accessible and this could also be used for drainage.

It would also be good if you could do the sockets/lighting as the fuseboard is also in the cellar.
Once this is done, I require it plastering and left suitable for painting.

* Added 27th October, 2012 :
To clarify some enquiries:

It is a standard victorian terrace cellar with around 6ft from floor to ceiling and roughly 13x13ft. I am not looking for a full 'habitable room' conversion (i.e. buildings reg compliant) as there is not really enough space to make it into anything useful plus may be be issues with fire escape requirements (i.e. large enough window to escape through) as it goes straight onto the pavement. My main requirements are cleaning and tanking along with with electricity/heating so it can be used as an additional room.

There may be scope for digging down to improve the head-height - options for this would be useful.

Job Description

We plan to extend our kitchen by knocking into the back half of our garage. We have full architect’s drawings. The job will involve knocking down two walls, putting in a steel and a lintel, plastering, hanging new doors and putting in some new drainage.
We have quotes for the plumbing and electrics, but are happy if you want to quote for this as well.

Job Description

Approx 10 ft internal sinlge skin wall to be removed (needs RSJ) to make open plan. The wall is joist and upper single wall bearing. Seperate existing door to be bricked up. General make up, plastering and make good.

Job Description

I have a window in my house that I want bricking up. I would also like a corridor sealed off with a stud wall.

Job Description

I am the home owner, home was built in 1984. There is a hole in the ceiling where I dropped a heavy toolbox through the plasterboard. In addition, the plasterboard had been weakened by long-term leaking from the shower. The shower leaking needs to be repaired, as do parts of the upstairs floor which have gone rotten through water damage.

Job Description

Our shed needs re-felting - need a quote including materials and labour.

Job Description

The area is 2.4x 5.0 metres and will accommodate 2 windows which are 1.8x2.0 metres each. Single skin brickwork, single storey is required and all bricks will be supplied by myself to match existing. Quote is required for labour and accessories wall ties etc. the floor slab is 100mm thick.

Job Description

Existing Soil pipe run already exposed, requiring Inspection Chamber to be cut in & fitted.
Approx. 100 sq. metres (10m x 10m) of driveway to have levels slightly adjusted to take plastic grass grid (snaps together) and help laying. N.B. Much of this preparation already done.
Need to have work completed by end Thursday 1st November.
Can be treated as 2 separate Jobs.

Job Description

To put up a metal shed in back garden do £70

Job Description

Looking for a builder to quote me on removing a wood beam in an old cottage and replace it with a steal support? Would require the work to be complete by end of October, if possible?

Job Description

Fitting 2 x (Supplied) Aluminium Bi-Fold Windows Units, including alteration of existing window openings

Work Details:
Alter existing window openings in both living room and dining room, and fit supplied aluminium Bi-fold door units (also remove and replace radiator in living room).

Dining Room:
• Support brickwork, remove old window and lintel. Enlarge opening from 1190mm x 1020mm, replacing cut bricks, fit new lintel.
• Fit 2400mm x 2100mm Aluminium Bi-Fold door (supplied) and make good of internal plaster work.

Living Room:
• Remove radiator and pipe work under floor screed and supply and fit new radiator (size 800mm x 600mm) to right hand side of window, making good floor.
• Support brickwork, remove old window and lintel. Enlarge opening from 1770mm x 1000mm, replacing cut bricks, fit new lintel.
• Fit 2400mm x 2100mm Aluminium Bi-Fold door (supplied) and make good of internal plaster work.

Please Note:
• Trader must supply a portfolio showing examples of similar Bi-Fold window projects completed.
• Trader to advise project timings in quote.
• Units to be purchased by client.
• All waste to be removed and disposed of by trader.
• Liaison with client’s Bi-Fold window supplier (e.g. for delivery, ensuring fitting requirements are appropriate for supplied units) to be overseen by trader to ensure fitting is as per trader’s requirements.

Job Description

I need a section of the concrete drive replacing and a new manhole cover.