Bricklaying jobs in Chislehurst, Kent

Job Description

To instal brick vent by the side wall

Job Description

to replace/repair brick work around old doorway opening in london stock to blend in with the other bricks. And to replace bricks around pipework where they have become damaged to give a consistant fininsh to the wall. This is all on a former outside wall which was the side return to a Victorian terraced house but is now an inside space.

Job Description

Existing gatepost pushed over by vandals - bricks look capable of being reused. Probably have post built to lower size to match neighbour's post so some material would need to removed.

Job Description

Remove existing garden low front wall (approx 5m long and 0.5m high), retaining iron railings. Rebuild wall in brick, render, paint with masonry paint. Refit and paint iron railings, removing rust as necessary. Render and paint wall with masonry paint to right of garden (approx 4.5m long). Remove all debris and rubbish.

Job Description

smaller job first: rake out and repair/repoint brick wall running down side of garden. Approx 3 ft high and 40 ft length. I would like this done as soon as is possible so I can then fix my garden fence to it.
Large job later in year: remove external render from right flank wall, repoint wall using lime mortar. replace bricks as necessary, which are London Yellow Stock. Size of wall is 3 storey Victorian townhouse. This will be a late summer job when I have the funds.

Job Description

Front (6m x 1.2) & Side(6m x 2) garden wall with area for bin storage. The front wall has foundations where the existing brickwork is, the side wall will be higher as the ground level is lower, it will also need foundations laying. There is currently a retaining Concrete wall that has subsided slightly and needs removing.

Job Description

ALSO NEED EXISTING SUPPORTS/STRUTS IN LOFT IMPROVED. WE HAVE A 2 BED HOUSE IN CHISLEHURST.

Job Description

I am looking for a bricklayer to build and external wall for me.

6.3m long, 9 course with horizontal slates and vertical engineers running along the top

Job Description

We would like to open up an old fireplace in a bedroom within an approx. 1850s building now converted into flats. The original lintel appears to have been removed so we require an approx. 900mm long concrete lintel (to suit opening approx. 600mm wide) installed and made good ready to receive plaster (existing aerated concrete blocks below may be left in place- we can remove and dispose).

We also require some re-pointing either side of an existing sash window (same room as the fireplace) where a gap has opened up between the timber window frame and existing mortar - allowing driving rain to get into the wall. We presume that a lime mortar mix will be required for a building of this age. Length is approx 1.4m vertically on both sides of the window.

Job Description

Hello,
The back of my house needs some repointing doing.
It is a two storey terraced Victorian house. The bottom of the wall also requires some protection from rain where it meets the patio.

Job Description

Dear Nick,

You have been recommended to us by or neighbour, for whom you did some work last year (Charlton).

We have moved into our house (Victorian mid-terrace) last summer and there is a number of things that we think need to be done and it would be nice if you could have a look at the list below and let me know if these are things you would be interested in doing for us.

1. Part of a ground floor wall (maybe 3 sqm) need to be re-pointed and a few cracks filled in the brick work, as rain water has in the past found is way to the inside.

2. Air bricks need to be removed from the kitchen wall (we have recently switched from a gas to an electric cooker, so these air bricks are not needed any more and only make the kitchen quite cold in winter).

3. 2-3 cracks in the pointing in a corner of the house on the second floor need to be filled as under certain circumstances rain water seems to enter through these cracks.

4. The bricks at the bottom of the entrance archway are crumbling and need to be replaced/repaired.

5. There is a concrete floor slab in front of the house in which the old coal chute cover is embedded. Rain water is dripping though the concrete into the cellar. Would it be possible to replace the concrete and make it watertight?

6. Would it be possible to replace the air bricks to the cellar with air bricks that have integrated fly screens or to add fly screens to the existing air bricks? This is to keep insects/slugs out of the cellar.

Please let me know if you are interested in any of the above jobs or if you need any further information.

I would of course be happy for you to come around to have a look so that you can get a better picture of the extend of the works required.

Many thanks in advance.

Kind regards,
Andre.

Job Description

Clean brickwork and remove sufficient mortar for complete repointing to three-storey victorian terrace house facade using lime mortar. Repair pointing to bricwork at rear of house as needed.

Job Description

I need a small garden wall built out of stock bricks (I have some already) and steps to garden (garden width 17"). I would like some paving done as well but not sure whether I can afford in my budget.

Job Description

Someone clipped the side wall when ascending out the driveway, a quater of the wall came down but all the bricks except for one or two are intact I have been quoted by three different proffesionals so i know how much it's going to cost the trouble is the tradesmen i was originally going to go with has delayed me time and time again and the job is now urgent. Get in touch and I can show you a picture of the work. Thanks.

Job Description

Hi

I am looking to have 3 sections of Balustrades installed (layed) onto existing concrete block pavers.

Section 1 -

2 x pedestals (with base and tops) 300mm x 300mm
2 x Base and top rails) 200mm x 600mm
5 x Balustrades

Section 2:

2 x pedestals (with base and tops) 300mm x 300mm
6 x Base and top rails) 200mm x 600mm
11 x Balustrades

Section 3:

2 x pedestals (with base and tops) 300mm x 300mm
1 x Base and top rails) 200mm x 600mm
2 x Balustrades

Balustrades already provided, just looking for them the be cemented together