Bathroom Fitting jobs in Haslemere, Surrey

Job Description

We have a bath and basin that need replacing in a rental property (which is also our home when we return to the UK, not just an investment, so love and attention to detail required!) It needs a replacement bath and basin installed.

Job Description

Install new 3 piece bathroom suite including tiling, flooring.

Job Description

Removal of Bath, installation of Shower Tray and Enclosure. Floor and wall tiling to match existing, removal of all debris, including bath.

Job Description

I want to change the sink in my bathroom to a "traditional" one with two taps and a normal plug - my current one is a solid plug and cannot use anymore because part of it went down the plughole!! I have seen the one I want in Jewsons and because it is a traditional type one, quite reasonably priced. I did have one chap come along to look at the job but that was two months ago now and he has not made further contact. He reckoned it would be done in a few hours. I do need isolating valves put in as well.

Job Description

Hi there, looking for a price for the removal of WHB, WC and shower then replacing them in the EXACT same position and tiling walls and floor. (Sanitary supplied by me)

Job Description

Hi, we're looking for someone to undertake a refit of our bathroom. We've established which fittings we like (from Balneal) so we need someone to come and quote for the fitting of it all. We will also need the bathroom fully re-tiling and painting too. It isn't a big bathroom so shouldn't be too time consuming.

Crucially, we need someone to undertake the work either from the 1st June (to be finished by 8th) or to start from the 15th June (to be finished by the 23rd June).

If you can fit this job in for either of these windows in June then please get in touch.

Thanks,
Jeremy Taylor

Job Description

Hi, we would like our bathroom cupboard replaced (it is under the sink and in a corner so a slightly odd shape thus would be a custom fit.)
We also would like the bath side panel replaced to match the cupboard.

Job Description

We need to replace our current basin with a new one with cabinet and want to re-tile the bathroom floor. Please can you advise me on your avaliability and when you could come out to price up the job?
Thanks

Job Description

We are moving on 29th July to a house where the preious owners removed the bath to make a shower with a partition wall. We need to return it to its previous layout as we have small children! This will involved removing the partition wall, and shower tray, installing a bath and moving the basin to a different wall.
We are looking for somebody who would be able to do it the first week we move in. 1st August.
Thanks

Job Description

Installation of follow in existing upstairs room.
1. D Shape Quadrant Show complete with Thermostatic Mixer controls.(Will be supplied)
2. WC toilet pack complete with cistern and seat.(Will be supplied)
3. Floor mounted pump for shower in nearby accessable adjacent area.
4. De- commission one double 13A power point and re-locate another one to just outside the bathroom for safety.
5. Re-location of House Alarm Control unit from bathroom to wall just outside bathroom.
6. Tiling of walls (to shower height)and floor. Estimate walls 14 m2, floor 8 m2.

Attached layout drawing and sketch are provided for information and to help with the costing.

All the above equipment will be supplied but bulk materials i.e. pipework, fittings for installation should be allowed for in the price.

* Added 13th May, 2011 :
The room for the required work is off an existing bedroom on the first floor of the house and already has a washhand basin fitted. The intent now is to fit a 'D' Shaped mixer shower unit and an adjacent WC into this area. Existing water connections are available from the loft above. A new pump will need to be fitted to supply hot water from the adjacent hot water cylinder to the shower mixer unit. Connections can easily be made to the existing drains systems outside the house. Electrically two existing 13 A double power sockets will need to be decommissioned and removed and an alarm panel will need to be moved and relocated to just inside the adjacent bedroom.
A site visit will be required to give a firm price.

Job Description

Fit a corner shower.
Tile floor and walls (floor to ceiling).
Fit hot & cold pipework into wall cavity. Fit shower waste. Fit shower enclossure.
Fit extractor fan (requires a hole through the outside wall). Feed elctrical wire from extractor fan to new external light switch (pull cord light switch inside bathroom to be removed).
Build a small boxing area at the head of the bath (where the tap is), because there is a 100mm gap between the bath and the wall.
The bathroom measures 2.3m x 1.8m.

Job Description

Phase 1
Fit shower waste. Build shower base. Fit hot & cold pipes into wall cavity.
Fit hot & cold supply to basin. Fit waste for basin.
Fit cold supply to WC.
Plaster over supply pipes, & other walls.
Fit door to downstairs shower room.

Job Description

Straightforward re-fit / tiling

Job Description

Please replace old 3 pc suite (new suite already at the house). Floor tiling and wall tiling. Removal of shower fittings.

* Added 13th September, 2010 :
Note: tiles to be fitted ontop of current recent tiles (no need to remove current tiles).

Thank you : )

Job Description

I will remove existing suite and tiles etc and have made good, i need new suite and tiles fitted, both will be provided. Includes p shaped shower-bath, toilet and basin which also do not need to be relocated.

Don't have size of room to hand right now, will post update later.

Complete on house on the 26th of the month, right now i can't quite remember how it's decorated. Would like wall mounted bath tap and shower if possible. I'm sure there are many questions i need to answer, so will leave it at that.