Bathroom Fitting jobs in Manchester, Lancashire

Job Description

Job includes vanity units fitting, tiling, flooring etc. If you are interested please call for the details.

Job Description

Design new bathroom/ wetroom for a flat size 6ft by 6ft approx. Tilling and flooring plus supplying materials and fixtures.

Job Description

Need a new bathroom fitted, only a small room 166cm x 164cm but old bathroom in at the moment. Requires full refurb.

Job Description

Small bathroom which needs a full new suite plus electric shower fitting. No need to move the pipes around. Plus re-tile over existing tiles as need to keep costs down.

Job Description

I need a new shower basin and possibly re:tiling. A new downstairs toilet cistern but may need a complete new toilet.

Job Description

To rip out old Bathroom suite, WC, sink & bath, fit supplied WC, Vanity unit/sink & shower enclosure, Tray, Bar Shower. Bar Shower will be fitted to stud wall so may need boxing out. Fit supplied UPVC wall panels to walls 1670x1855x2600(hgt) & UPVC ceiling panels. Pipework must be run below floorboards. I will supply all components apart from any pipework needed.
Max. Budget £1000 but open to some leverage ;)

Job Description

Refurbishment of bathroom and separate w/c, total size 6ft x9ft (approx):

Knock through wall between toilet and bathroom
Block up existing toilet door
Remove/dispose existing bathroom suite (toilet/bath tub/sink/shower)
Replace with new suite (bath tub/toilet/sink and either separate shower cubicle or shower over the bath)
Lay new floor
Tile walls
Sort out lighting

We are looking to do all of the above but wanted to get some quotes and an idea of what is possible with the layout of the room when the wall is knocked through. We have yet to buy the suite as we want to have better idea of what we can do first.

Job Description

Full bathroom renovation required in Manchester City Centre apartment including the installation of new sanitary ware, wiring of shaver socket, electric towel heater & LED lighting, plus tiling.

Current bathroom fixtures and fittings, including wall tiles, will be removed prior to work commencing. Current flooring consists of ceramic tiles which are extremely difficult to remove as laid directly onto the concrete floor below. The will be left in situ to be tiled over.

All new fittings listed below have already been / will be purchased, so only a quote for labour plus any further materials needed in addition is required:

Sanitary Ware - Bath/Shower
Duravit Vero Bathtub with Left Slope 1700x750mm White
Duravit Vero Bathtub Anchors
Crosswater Click Bath Filler & Waste Chrome
Crosswater Kai Wall Mounted Bath/Shower Diverter Chrome
Crosswater Kai 3 Mode Shower Kit 900mm Rail Chrome
Crosswater Golf Wall Outlet Chrome
Simpsons Elite Bath Screen Glass/Chrome

Sanitary Ware - Basin
Duravit Vero Basin with No Tap Hole 500x470mm White
Duravit Vero Stand for Basin 500x470mm Chrome
Crosswater Millennium Tall Bottle Trap Chrome
Crosswater Slotted Click Basin Waste Chrome
Crosswater Kai Wall Mounted Basin Filler with Back Plate Chrome

Sanitary Ware - Toilet
Duravit Vero Wall Mounted Pan White
Duravit Vero Toilet Seat with SoftClose Action White
Geberit Duofix 0.98M Cistern and Frame
Geberit Kappa 50 Dual Flush Plate Chrome

Tiles - Walls
Crackle Glaze Richmond Park Retro Metro Tiles (75x150mm / 88 tiles per sq m)
Penthouse Reclaimed Red Brick Tiles (60x230mm / 66 tiles per sq m)

Tiles - Floor
Tapas Reclaimed Spanish & Italian Encaustic Tiles (200x200mm / 25 per sq m)

Electrical
MK Electric Edge Shaver/Toothbrush Supply Unit Brushed Steel (K14709)
Brunswick 350 Polished Stainless Steel Electric Towel Rail (1250x350mm)

Please see attached images of current bathroom and plans of new.

The wall which is to have the electric towel radiator installed needs to be built out by approximately 25mm so the room is the same width as the length of the bath. Wiring needs to be installed for lighting above and below wall cabinet, which is to be made by a third party once bathroom installation is complete. A two gang switch plate outside the bathroom has already been installed to facilitate this.

Job Description

I need a like-for-like bathroom replacement for a small bathroom (bath/shower, toilet, sink, towel rail). Thr room is approx 1.6m x 2m. The plumbing configuration will be staying the same.

I have an idea of what I want for the bathroom suite and am happy to source this myself but would appreciate running through with the fitter before purchasing.

I need the floor tiling and a proportion of the walls tiling .
The rest will require painting but I'm happy to do this myself.

I also would like the ceiling re-plastwered and 4 spot lights putting in, but this can be part of a seperate job if you can't do it.

Job Description

replace shower tray, shower fitting, sliding door and retile in existing shower cubicle

Job Description

I would like a walk in shower cubicle fitted a new toilet and vanity unit. I also want all the old tiles removed,on two walls there may be up to three lots of old tiles,and the whole bathroom retiled.I also want a heated towel rail fitted where the radiater is now The size of the room is 9ftx5ft.I am open to any ideas you may have.

Job Description

Mosaic tiling around 3 sides of bath, floor tiling and fitting of bath and shower.
Replacing old for new, no pipework changes should be necessary, so hopefully straight swap.

Mosaic tiling is 5 SqM
floor is 3 SqM

I will supply all materials, will go through requirements with appointed person before purchasing.

Job Description

Re-designing existing shower room, Installing shower cubicle, moving existing toilet,re-tiling walls.
Room measures approx.6' 6" square.

Job Description

What I need doing:
to remove current bathroom suite excluding the bath
replace toilet
replace and move sink and radiator
replace sink & bath taps as well as a shower mixer
level out the the floor with plywood
replace soil stack
replace current lights with spotlights

all fixtures will be provided, floor and wall tilling can be done separately

Job Description

bathroom 6ft 4 x 7ft 2
supply and fit washbasin plus taps etc/supply fit and move wc/supply fit walk in shower cubicle and shower/supply fit radiator/tile 4 walls,supply/fit extractor fan/supply and fit tiles or other material bathroom floor