Bathroom Fitting jobs in Welling, Kent

Install new bathroom

  • Location: Sydenham
  • Hired: Hilliers
  • Trade: Bathroom Fitting
Job Description

Knock through toilet and bathroom.
Replace existing tiles ( currently there is a double layer)
Put in new suite and add shower cubicle with thermostatic shower.
fit extractor fan
Lay new flooring

Bathroom refurbishment, build en-suite and cloak room

  • Location: East Ham
  • Hired: Marton Builders
  • Trade: Bathroom Fitting
Job Description

Completely refurbish the family bathroom by changing all the current units, remove all the tiles and skim roof, fit with new units. Extend the toilet to create new unit and this involves demolishing a partition wall and building a new wall and then fit all units (toilet, washbasin and shower cubicle). Build a new Cloak Room on ground floor to fit tiles, toilet and washbasin, make connection to the waste drainage.

Complete bathroom refit

  • Location: Hornchurch
  • Hired: Bailey Day Heating and plumbing
  • Trade: Bathroom Fitting
Job Description

We need a complete bathroom refit please. Job would include fitting new suite, plumbing and tiling. Bathroom has been purchased and we'd like the work done asap. More work available if job is completed efficiently and to a high standard.

Complete new bathroom

  • Location: Upper Norwood
  • Hired: WoodBookers
  • Trade: Bathroom Fitting
Job Description

Design ideas and then source and fit a complete new bathroom suite with walk in shower, bath, toilet and basin then retiling and decoration of bathroom

Leaking shower - repair damp floor/ceiling. re-silicone

  • Location: Dalston
  • Hired: Evolve Property Solutions Ltd
  • Trade: Bathroom Fitting
Job Description

I have a shower cubicle in the bedroom which is in need of a new silicone seal. It may also need the tray taken out and cleaned up underneath in case of any permanent damage to the floor. The neighbours below are seeing leaking and damp patches on their walls/ceiling below.
The cubicle is old and the setup itself is slightly ridiculous (being a shower cubicle in the bedroom) but the intention is to do a loft extension eventually and so this problem needs a quick fix to stop any further damage and problems before a proper rebuild is started. I basically want to keep my neighbours happy before I get planning permission.

I am away in Australia right now so communication between us can't be so fluid but the tenant is a friend and helpful, the neighbours also and my cousin lives close by. Your help would be greatly appreciated.

Thanks

Jonathan.

bathroom redecorating and tiling

  • Location: Camberwell
  • Hired: gary
  • Trade: Bathroom Fitting
Job Description

The property is ex local authority, in Camberwell, double glazed windows recently fitted, bathroom needs repair including tiling and possibly some carpentry work too. Looking for quotes to get work done as soon as possible.

Tiling

  • Location: Canary Wharf
  • Hired: Base property development
  • Trade: Bathroom Fitting
Job Description

I want to replace the pipe duct boxing at my bathroom and tile it to half wall high.

Replace falt shower mixer

  • Location: Orpington
  • Hired: Mustafa Dervis
  • Trade: Bathroom Fitting
Job Description

The mixer is mounted on the wall and conceiled by tiles.

Brand is Aqualisa and i already have the parts.

Refit and refurb cloakroom WC

  • Location: Streatham Hill
  • Hired: ERRA Developments
  • Trade: Bathroom Fitting
Job Description

Cloakroom WC needs complete refurb and refit. The following are essential:

1) replace and hide exposed piping;
2) replace toilet and basin;
3) add splashback to sink;
4) relocate light-switch to outside door (i.e. get rid of pull cord);
5) re-plaster

We want a finished and usable product and don't want to solicit individual trades.

Replacement bathroom fitting & tiling

  • Location: Dalston
  • Hired: All refurbishment work
  • Trade: Bathroom Fitting
Job Description

Small bathroom in a 1 bed flat to be fitted. All fittings in same place as existing fittings, also needs tiling.

New Bathroom

  • Location: Streatham Hill
  • Hired: MikeandMaggie
  • Trade: Bathroom Fitting
Job Description

Gut old bathroom and refit new.
Bathroom is 2.15 x 2.73 m
Currently bathroom is fully tiled on 4 walls with good condition ceiling and lino floor (on wood). We had a leak with the shower that means an opportunity has arisen to re-fit/update the room.

What we want:
1 wall will be plaster finish and the other 3 will be half plastered/half tiled (apart from shower cubicle which will be fully tiled). Ceiling will be unchanged.
Toilet/sink/shower unit to be replaced (position stays the same although sink to change from pedestal to wall hung).
Bath to switch from corner bath to normal bath, tap position moving slightly accordingly - taps at same end of bath.
Radiator to move location entirely from 1 wall to another.

Electrical works - Want to increase wall mounted lights (around mirror) from 1 to 2, put in an additional shaver socket (from 1 to 2) and mount a new wall fan heater. Also need to replace extractor fan (please supply).
Half of bathroom suite is on order, other half is earmarked and ready to order. Tiles also ready to order.
Couple of shelves required - 2 into exterior wall and 1 into stud wall.

We will take care of painting and floor once bathroom is replaced. Have detailed pictures which show tiling pattern as well as layout.

Thanks, Al

Bathroom suite fitting

  • Location: Barking
  • Hired: Costel Boicu
  • Trade: Bathroom Fitting
Job Description

1 bathroom suite fitting & Tiling.
1 downstairs toilet and sink fitting & plastering.
Move of the washing machine from the utility room to the kitchen
Job in Barking.
Mid February start
Quote to include labour unless can provide materials cheaper from buying at trade merchants.

Fit an Electric Shower

  • Location: Canning Town
  • Hired: Costel Boicu
  • Trade: Bathroom Fitting
Job Description

Hi,

I would like someone to replace my existing electirc shower. I already have bought a new shower, so just need fitting.

Many thanks

Replace Bath with new item and fit better seal.

  • Location: Grays
  • Hired: marshalls plumbing
  • Trade: Bathroom Fitting
Job Description

We have a 13 year old bath which is scratched and tatty and needs replacing with a new bath.
The current bath is white standard size plastic, butted against tiled walls on three sides with a silicone sealant seal that is patched, split and mouldy ie totally unfit for purpose. This seal is covered by a plastic strip on three sides. The seal is failing on two sides and letting water damage the ceiling below.

We would like a white similar bath fitted with a new seal (not silicone sealant) fitted below the tiles, that is durable, mould resistant and long lasting. The line of tiles at seal level (8" x 8" white) will need removal and replacement. The bathroom gets very cold and wet with condensation and is very mouldy in the winter .

If possible , I would like to discuss possibly replacing the bath with a shower cubicle and fitting an extractor fan through the wall (9" solid brick) This may prove too costly but we at least need a new bath with a substantial seal.

Tradesman to supply bath,taps, seal etc. plumbing config to stay as is.

Thanks.

New bathroom required

  • Location: Clapton
  • Hired: Archiesons
  • Trade: Bathroom Fitting
Job Description

New bathroom re-fit required. New sink, WC and replacing a bath with a shower cubicle. Bathroom is 2.69m long x 1.26m wide. No tiling or flooring required, as this will be completed by my step-father.

MyBuilder for Tradesmen

Sign up
Register as a Tradesman
Express interest in jobs
Choose the jobs you want
Get Shortlisted
Job posters will add you to their shortlist
Win Work, Get Feedback
Positive feedback gets you more work
"I have been using MyBuilder now for a couple of years and must congratulate you all on producing a professional site that provides me with work."
David Winterbottom
Locations
>Welling
>Plumstead
>Cross Ness
>Abbey Wood
>Woolwich
>Avery Hill
>Bexleyheath
>Sidcup
>Thamesmead
>Belvedere
>Bexley
Read about MyBuilder in the Press