Bathroom Fitting jobs in Luton, Bedfordshire

Job Description

Full refit of bathroom - Basin with vanity base unit and cupboards, toilet, bath, bath screen, heated towel rail and approx 6.5sqm of tiling

Job Description

Floor tiles and bath panel to fit. Require reliable person quote for labour ONLY all other materials will be supplied. Job to be completed ASAP

Job Description

to take out exisitng bathroom suite , remove all tiles and internal stud wall to bedroom
build new stud wall and plasterboard wall
remove paper from ceiling
to skim bedroom side of wall and ceiling and coving
to fit new skirting in bedroom
to supply and fit 5 chrome down lights and extractor light over shower and alter electrics to suit
to fit shower control, tray and glass panel. two units, worktop, toilet, basin and bath and panel all supplied by us
to alter all pipe-work needed
to plywood floor
to tile all walls and floor with tiles supplied by use
to seal all bathroom joints
to clear all rubbish away

Job Description

We are looking at dividing a ground floor room into two and installing a shower room with WHB and WC in one half with a utility room in the other half. Apart from supplying, plumbing and installing the sanitary items, as it is not just a refurb the following will be needed: -

-dividing wall to split existing room into shower room and a separate utility room
-drainage from manhole in back garden - shower room will be on eternal wall about 2-3m from manhole. Ideally and external open top gulley for shower and WHB but would like the stub stack for the WC to be internal to pick up waste from washing machine in utility and a boiler condensate drain in the adjacent room. includes all external trenching and making good
-existing water services to an upstairs ensuit to be disconnected and rerouted to serve shower room and water supply to utility room. These are run in the roof space of the single story extension where the shower room is to be located
-the existing pump to the ensuit is only couple of years old so can be relocated with power supply in the roof space
-split lighting circuit and relocate/provide new lights
-mods to existing power within room - new outlets in utility, shaver socket,etc
-existing radiator to be changed for smaller one. the pipe connections will need to be moved as will clash with the shower tray. The heating system drain is on the opposite side of the wall to this radiator so suggests the whole heating system may have to be drained to do this.
-potential for built in joinery for WC and WHB with cupboards above
-tile wall and floor including including suitable backing board and base floor
-plaster utility room side of new wall
-extract to shower room and utility. fans can be located in roof space with exhaust through side wall.
-vent in wall for tumble dryer

- possible heating system service inc flue

The room is empty and ready for work to be done and we can pay in cash.

Unfortunately we are only available before 8am or after 6pm weekdays or at anytime weekends to discuss in person or for you to view the property.

Job Description

I am looking for some quota to refit a 3 piece bathrrom, and adding a shower we have an unused space that we wish to turn into a walk in shower

Job Description

Hello,
I would like to replace the bath, toilet and sink in my bathroom. I can provide the fittings or they can be provided as part of the quote. It is a straight replacement (i.e. no relocation of pipes) of these items so no further redecoration will be required unless tiles are damaged and need replacing etc.

I would like a suite of approx. this type and price: http://tinyurl.com/a595vwn

The bathroom is 1.7m wide x 2.5m long. The bath is 1.67m long so not sure whether a 1600 or 1700 bath is the one to get. Advice would be appreciated.

Please indicate your availability to start the job with the quote. Thank-you.

Job Description

2.2m x 2.4m bathroom.
Remove existing bathroom (corner bath, close couple WC, sink + pedestal)
Run new pipes for bath/ shower.
Install bath (1700 x 750)/ shower valve & shower ceiling arm + shower pump.
Install new sink & pedestal.
Install new close coupled WC (same place as existing and same waste position).
Plaster all walls and ceiling (currently artex).
Tile wall above bath & surrounding area (including shower enclosure). approx 6 sq m.
Paint remaining walls and ceiling.
Install extractor fan & run to outside soffit. (electrics provided by customer)
Tile floor (about 3.5 sq m).

All furniture, tiles + fittings provided by customer, but not sundries/ plaster/ grout, plumbing etc.

Hope this is enough for a quote, I've got some diagrams and can provide photos if needed.

Cheers, Jon

Job Description

Replace seal around bath - 3 sides

* Added 28th January, 2013 :
Also to install ceiling mounted extractor unit.

Job Description

I am looking to redo my bathroom. I would like a new suite with vanity units, replastering walls and ceiling, tiling floor and walls (and removing old tiles), fitting extractor fan, heated towel rail and mirror. I have found tiles I like but would like a price for units and bathroom suite as I have not yet decided on these. The dimensions of the bathroom are 2.5m x 1.7m. I am looking for someone that can start within a reasonable time period (couple of months ideally).

Job Description

Fit Shower/mixer tap and shower pump.

Job Description

Replace suite including swapping bath/handbasin locations. add new pumped shower, move radiator 15 cm, (fit new one), add ventilation, tile entire room /tile floor (quote separately), swap door left/right, move shaver point. All suite etc to be provided. 175 x 225 room dimensions, 1970s brick built flat.

Job Description

looking for quotes for new bath, shower over bath, tiling, all plumbing & electrics. Existing sink, toilet and tiled floor to remain. Interested in labour only and materials/labour quotes. Also need new sick/drainer/tap fitted in kitchen.

Job Description

The bathroom in our flat has a couple of problems which we need to have looked at and then have put right but we need an idea of cost first. First problem is that our shower screen leaks, so that water has got into/beneath some of the woodwork by the bath which looks like it's starting to rot. Second problem is that the bathroom door won't shut easily because (we think) water has now got under the lino, raising the strip under the door. We're considering having the lino replaced with tiles and need to know if this is a viable option.

Many thanks

Job Description

1. Remove existing bathroom suite
2. Replace floorboards
3. Replace ceiling
4. Tiling to be completed as specified
5. Install new flooring (possibly tiled over)
5. Install new bathroom suite
6. Install shower over bath
7. Fit a new radiator

Size of bathroom 1.80m x 1.80m (6 x 6ft)

The old tiles have already been removed.

Job Description

We currently have a shower attached to the taps of our bath, but the hot water pressure is feable! We'd ideally like a power shower installed to run into the bath.